Embark on a do-it-yourself journey with this complete information to dismantling your Xbox One S. Whether or not you are dealing with a minor restore or in search of a deeper understanding of the console’s internal workings, this step-by-step tutorial will empower you with the information and confidence to disassemble your Xbox One S with ease. By following our meticulously detailed directions, you will navigate the intricate parts and thoroughly extract them, leaving no screw unturned and no thriller unsolved.
Earlier than embarking on this disassembly, it is crucial to collect the mandatory instruments and create a workspace conducive to precision work. Guarantee you could have entry to a set of screwdrivers, together with T8, T10, and T15 sizes. Moreover, a plastic spudger or opening instrument will show invaluable for gently prying and separating parts with out inflicting injury. As you proceed via the disassembly course of, meticulous group is essential. Hold observe of screws and small elements, meticulously labeling them to keep away from any mix-ups throughout reassembly.
As you enterprise deeper into the console’s recesses, you will uncover a myriad of parts. Be ready to come across the facility provide, motherboard, CPU, GPU, exhausting drive, and optical drive. Disconnect cables with precision, being attentive to their unique positions to facilitate seamless reassembly. All through the disassembly, deal with parts with care, avoiding potential injury attributable to static discharge. With every profitable step, your understanding of the Xbox One S’s intricate design will deepen, empowering you with the information to resolve any points which will come up sooner or later.
Figuring out the Obligatory Instruments
Earlier than embarking in your Xbox One S disassembly, it is essential to collect the suitable instruments. These instruments will enable you dismantle and reassemble the console safely and effectively. Here is the checklist of important instruments you will want:
| Instrument | Function |
|---|---|
| Phillips #0 Screwdriver | Eradicating and tightening screws all through the console |
| T8 Torx Screwdriver | Loosening the screws securing the underside panel |
| T9 Torx Screwdriver | Eradicating the screws holding the disc drive in place |
| Plastic Pry Instruments | Gently separating and prying open numerous parts |
| Tweezers | Dealing with small elements, similar to screws and connectors |
| Anti-Static Wrist Strap | Stopping electrostatic discharge that may injury parts |
Along with these instruments, it is really useful to have a well-lit workspace, a clear floor, and a magnetic tray to maintain observe of small elements. Collect these instruments earlier than beginning the disassembly course of to keep away from any interruptions or delays.
Powering Down and Unplugging the System
Safely Powering Down Your Xbox One S
Earlier than you start to disassemble your Xbox One S, it is essential to energy it down appropriately. To do that:
1. Press the Xbox button on the console or controller to open the Information.
2. Choose “Settings” from the menu.
3. Navigate to “Basic” after which “Energy mode & startup.”
4. Select “Shut down console” and make sure your choice.
As soon as the console is totally powered down, you possibly can proceed to unplug it from the facility outlet.
Unplugging the Console and Peripherals
1. Find the facility cable related to the again of the Xbox One S.
2. Firmly grasp the plug and gently pull it straight out of the facility outlet.
3. Disconnect any peripherals related to the console, together with controllers, headsets, and exterior storage units.
Ideas for Protected Unplugging
| Tip | Description |
|---|---|
| Keep away from pulling on the cable | This will injury the cable or the port on the console. |
| Use your fingers or a instrument | If it is tough to take away the plug by hand, use a small instrument like a flathead screwdriver to softly pry it out. |
| Guarantee all connections are agency | Earlier than plugging the console again in, be certain that all cords are securely related. |
Eradicating the High Cowl
To take away the highest cowl of your Xbox One S, you’ll need a Torx T8 screwdriver. Listed here are the steps:
- Find the 2 black screws on the again of the console, close to the underside. These screws are lined by rubber ft, which you’ll take away along with your fingers.
- Take away the 2 screws.
- Raise the highest cowl up and off the console. The quilt is held in place by clips, so it could require some drive to take away it.
Eradicating the Rubber Ft
The rubber ft on the underside of the Xbox One S are held in place by adhesive. To take away them, you need to use a pair of tweezers or a flathead screwdriver.
If you’re utilizing tweezers, merely seize the sting of the rubber foot and pull it up. If you’re utilizing a flathead screwdriver, insert the screwdriver underneath the sting of the rubber foot and pry it up.
Eradicating the Screws
The screws that maintain the highest cowl in place are Torx T8 screws. To take away them, you’ll need a Torx T8 screwdriver.
Insert the screwdriver into the pinnacle of the screw and switch it counterclockwise to loosen the screw. As soon as the screw is unfastened, you possibly can take away it by hand.
| Step | Motion |
|---|---|
| 1 | Find the 2 black screws on the again of the console, close to the underside. |
| 2 | Take away the 2 screws. |
| 3 | Raise the highest cowl up and off the console. |
Disconnecting Inside Parts
As soon as the highest cowl is eliminated, you possibly can start disconnecting the interior parts. Here is a step-by-step information:
1. Disconnect the Energy Provide
Find the facility provide unit in the back of the console. Gently pull the facility provide connector from the motherboard.
2. Disconnect the Optical Drive
Pull the optical drive ribbon cable from the motherboard. Subsequent, take away the 2 screws securing the optical drive to the chassis. Then, fastidiously carry the optical drive out of the console.
3. Unplug the Bluetooth and Wi-Fi Module
Find the Bluetooth and Wi-Fi module on the motherboard. Rigorously unplug the module’s ribbon cable.
4. Detach the Fan and Heatsink Meeting
The fan and heatsink meeting should be fastidiously indifferent. It consists of the next parts:
| Element | Description |
|---|---|
| Fan | Cools the console whereas operating |
| Heatsink | Dissipates warmth away from the processor and different parts |
| Two screws | Safe the heatsink to the chassis |
| Thermal paste | Conducts warmth from the processor to the heatsink |
To take away the fan and heatsink meeting, observe these steps:
- Find the 2 screws that safe the heatsink to the chassis.
- Utilizing a screwdriver, take away the screws.
- Rigorously carry the heatsink straight as much as detach it from the console.
- Examine the thermal paste and clear any extra earlier than reassembly.
- Detach the fan from the heatsink by disconnecting its energy connector.
Eradicating the Energy Provide Unit
Step 1: Unplug the console. Make sure the Xbox One S shouldn’t be related to any energy supply earlier than continuing.
Step 2: Take away the underside panel. Flip the console the wrong way up and find the plastic panel overlaying the underside. Push down on the tabs on the edges and slide the panel in the direction of the entrance of the console to take away it.
Step 3: Disconnect the facility provide unit harness. Contained in the console, discover the black cable harness connecting the facility provide unit to the motherboard. Gently pull the harness connector straight as much as disconnect it.
Step 4: Take away the facility provide unit screws. There are 4 screws securing the facility provide unit to the chassis. Take away these screws utilizing a T10 Torx screwdriver.
Step 5: Raise and take away the facility provide unit. Rigorously carry the facility provide unit up and out of the chassis. It might be essential to wiggle it barely to free it from any clips or tabs securing it in place.
| Element | Description |
|---|---|
| Energy provide unit harness | Connects the facility provide unit to the motherboard |
| T10 Torx screwdriver | Required for eradicating the facility provide unit screws |
Separating the Controller Ports
After you have eliminated the highest panel, you’ll need to separate the controller ports from the principle physique of the console. To do that, you’ll need to make use of a Philips #00 screwdriver to take away the 4 screws which can be holding the controller ports in place.
As soon as the screws have been eliminated, you possibly can fastidiously carry the controller ports up and away from the principle physique of the console. Watch out to not injury the ribbon cable that’s connecting the controller ports to the motherboard.
With the controller ports eliminated, you’ll now have entry to the motherboard and different inside parts of the console.
Here’s a extra detailed step-by-step information to separating the controller ports:
- Take away the highest panel of the console.
- Find the 4 screws which can be holding the controller ports in place.
- Use a Philips #00 screwdriver to take away the screws.
- Rigorously carry the controller ports up and away from the principle physique of the console.
- Watch out to not injury the ribbon cable that’s connecting the controller ports to the motherboard.
After you have separated the controller ports, you possibly can proceed to the following step of disassembling the console.
Reassembling the Xbox One S
After you have cleaned and inspected all the parts, it’s time to reassemble the Xbox One S. Begin by inserting the motherboard again into the chassis. Guarantee that the connectors are correctly aligned and that the screws are tightened securely. Subsequent, connect the facility provide to the motherboard and safe it with screws. Join the HDMI port to the motherboard and safe it with a screw. Connect the optical drive to the motherboard and safe it with screws. Join the exhausting drive to the motherboard and safe it with screws. Join the wi-fi card to the motherboard and safe it with screws. Place the highest cowl on the Xbox One S and safe it with screws. Join the facility twine and HDMI cable to the Xbox One S and switch it on to check it.
10. Join the entrance panel and buttons
The entrance panel is the final piece to be put in. It snaps into place excessive and sides of the Xbox One S. Guarantee that the entrance panel is correctly aligned earlier than snapping it into place. As soon as the entrance panel is in place, you possibly can connect the buttons. The buttons are held in place by clips. To connect a button, merely push it into place till it snaps into the clip. As soon as all the buttons are hooked up, you could have efficiently reassembled the Xbox One S. Congratulations!
Extra ideas
Listed here are a couple of extra ideas for reassembling the Xbox One S:
- Watch out to not overtighten the screws.
- Guarantee that all the connectors are correctly aligned earlier than connecting them.
- If you’re having any problem reassembling the Xbox One S, confer with the official Xbox One S service handbook.
| Element | Screws |
|---|---|
| Motherboard | 4 |
| Energy provide | 4 |
| HDMI port | 1 |
| Optical drive | 4 |
| Exhausting drive | 4 |
| Wi-fi card | 2 |
| High cowl | 5 |
| Entrance panel | Snaps into place |
| Buttons | Clips |
How To Take Aside Xbox One S
To take aside an Xbox One S, you’ll need the next instruments:
- A Phillips #00 screwdriver
- A T8 Torx screwdriver
- A plastic spudger
- A pair of tweezers
After you have gathered your instruments, observe these steps:
- Unplug the Xbox One S from the facility outlet and take away all cables.
- Place the Xbox One S the wrong way up on a flat floor.
- Use the T8 Torx screwdriver to take away the eight screws that safe the underside cowl of the Xbox One S.
- Use the plastic spudger to softly pry the underside cowl off of the Xbox One S.
- Use the Phillips #00 screwdriver to take away the 2 screws that safe the optical drive.
- Disconnect the facility cable from the optical drive.
- Use the plastic spudger to softly pry the optical drive out of the Xbox One S.
- Use the Phillips #00 screwdriver to take away the 4 screws that safe the motherboard.
- Disconnect the ribbon cables from the motherboard.
- Rigorously carry the motherboard out of the Xbox One S.
- Use the tweezers to take away the thermal paste from the CPU and GPU.
- Use the plastic spudger to softly pry the warmth sink off of the CPU and GPU.
- Exchange the thermal paste on the CPU and GPU.
- Reattach the warmth sink to the CPU and GPU.
- Reinsert the motherboard into the Xbox One S.
- Reconnect the ribbon cables to the motherboard.
- Reinsert the optical drive into the Xbox One S.
- Reconnect the facility cable to the optical drive.
- Exchange the 2 screws that safe the optical drive.
- Exchange the underside cowl of the Xbox One S.
- Exchange the eight screws that safe the underside cowl.
- Plug the Xbox One S again into the facility outlet and reconnect all cables.
Individuals Additionally Ask About How To Take Aside Xbox One S
How do I open an Xbox One S with out breaking it?
To open an Xbox One S with out breaking it, you’ll need to observe the steps outlined above fastidiously. Make sure you use the proper instruments and be mild when prying the parts aside.
What are the most typical issues with Xbox One S?
The most typical issues with Xbox One S embrace overheating, disc drive points, and controller issues.
How can I stop my Xbox One S from overheating?
To stop your Xbox One S from overheating, you must guarantee that it’s well-ventilated and that the vents will not be blocked. You also needs to keep away from inserting the Xbox One S in enclosed areas or close to warmth sources.
