Renovating your kitchen generally is a daunting job, particularly in terms of eradicating massive home equipment like wall microwaves. These models are sometimes heavy and may be troublesome to maneuver, to not point out {the electrical} wiring and security hazards concerned. Nevertheless, with the best instruments and somewhat know-how, you may safely and effectively take away a wall microwave and clear the way in which for a contemporary new look.
Earlier than you begin, be sure to have the mandatory instruments readily available. You may want a screwdriver, a drill, a pair of pliers, and a ladder or step stool. If the microwave is wired instantly into the wall, you may additionally want a voltage tester and wire cutters. After you have your instruments assembled, it is time to get began. First, flip off the ability to the microwave on the circuit breaker or fuse field. It will stop any electrical shocks or accidents in the course of the elimination course of.
Subsequent, take away the screws that maintain the microwave in place. These screws are usually situated on the highest and backside of the unit. As soon as the screws are eliminated, rigorously elevate the microwave off the wall and set it apart. Watch out to not drop or injury the unit. If the microwave is wired instantly into the wall, you’ll need to disconnect the wires earlier than you may take away it utterly. Use a voltage tester to verify the wires are usually not stay earlier than touching them. As soon as the wires are disconnected, you may safely take away the microwave from the wall.
Security Precautions
Common Pointers
* All the time disconnect the microwave from {the electrical} outlet earlier than making an attempt any repairs or changes.
* By no means function the microwave with the door open or broken. This could trigger dangerous radiation and electrical shock.
* Keep away from touching the steel casing or inside components of the microwave, as they could be sizzling.
* Permit the microwave to chill utterly earlier than making an attempt to take away it from the wall.
* Use correct lifting strategies to keep away from damage. If the microwave is especially heavy, it’s endorsed to hunt help from one other particular person.
Particular Precautions for Over-the-Vary Microwaves
* Pay attention to any supporting brackets or screws that could be holding the microwave in place. These must be eliminated rigorously to stop injury to the equipment or the wall.
* If the microwave is vented to the surface, be certain that the vent hose is disconnected and sealed correctly.
* Examine for any wires or cables that could be linked to the microwave. These must be rigorously indifferent and labeled for simple reattachment later.
Further Ideas
* It’s useful to have a second particular person current to help with the elimination course of, particularly if the microwave is massive or heavy.
* Use a flashlight or headlamp to light up the work space, particularly if the work is being accomplished in a confined area.
* Take your time and be affected person. Eradicating a wall microwave may be difficult, however with correct precautions and cautious execution, it may be accomplished safely and successfully.
Gathering Obligatory Instruments
Security Gear
Earlier than commencing any work, guarantee your security. Put on protecting gloves, security glasses, and a mud masks to stop damage from sharp edges or particles.
Important Instruments
- Cordless drill or screwdriver
- Drill bits or screw bits
- Stud finder
- Degree
- Socket wrench or adjustable wrench
Elective Instruments
Relying on the particular microwave set up, you may additionally want the next instruments:
| Software | Function |
|---|---|
| Wire cutters | For reducing electrical wires |
| Voltage tester | To make sure electrical security |
| Caulk gun and caulk | For sealing gaps across the microwave |
| Utility knife | For reducing insulation or wires |
Beneficial Supplies
Along with instruments, you may additionally want the next supplies:
- New screws or bolts (if crucial)
- Electrical tape
- Electrical wire nuts
- Mounting bracket (if the present one is broken)
Disconnecting the Energy Provide
To disconnect the ability provide to your wall microwave, comply with these steps:
1. Flip off the circuit breaker or fuse
Find {the electrical} panel to your house and establish the circuit breaker or fuse that controls the ability to the microwave. Flip off the breaker or take away the fuse.
2. Unplug the microwave
Disconnect the microwave’s energy wire from {the electrical} outlet.
3. Take away the mounting bolts
Most wall microwaves are mounted to a wall bracket utilizing two or 4 bolts. These bolts are usually situated on the prime and backside of the microwave. Use a wrench or socket to take away the bolts, however watch out to not drop the microwave.
If the bolts are troublesome to take away, chances are you’ll want to make use of a penetrating lubricant or apply downward strain to the microwave whereas unscrewing the bolts.
As soon as the bolts are eliminated, the microwave may be rigorously lifted off the wall bracket.
Eradicating the Mounting Bracket
After you have disconnected the ability and eliminated the trim package, you may start eradicating the mounting bracket. Here is an in depth step-by-step information:
- Find the Mounting Screws: Usually, the mounting bracket is secured to the wall with two or 4 screws. Search for them on the highest and/or backside of the bracket.
- Take away the Screws: Utilizing a screwdriver or drill, rigorously take away the screws. Be sure that to carry the microwave regular as you do that.
- Carry the Microwave Off the Bracket: With the screws eliminated, gently elevate the microwave straight as much as detach it from the bracket. Be cautious to not let it swing or drop.
- Disconnect the Wiring from the Bracket: Usually, there will likely be a wiring harness connecting the microwave to the bracket. Disconnect this harness by urgent the discharge tab or unscrewing the connector. Observe the placement of the wires for reassembly.
| Essential Security Observe: |
|---|
| All the time disconnect the ability provide earlier than eradicating the mounting bracket to stop electrical shock or different hazards. |
Detaching the Microwave from the Wall
As soon as you have disconnected the microwave from the ability provide, it is time to detach it from the wall. This course of will differ relying on the kind of mounting bracket used. Listed below are the overall steps for every kind:
| Mounting Bracket Sort | Detachment Steps |
|---|---|
| French Cleat |
Gently elevate the microwave straight as much as disengage it from the cleat on the wall. Don’t pull the microwave ahead or backward, as this might injury the cleat or the microwave. |
| Bracket with Screws |
Use a screwdriver or drill to take away the screws that safe the microwave to the bracket. As soon as the screws are eliminated, rigorously elevate the microwave off the bracket. |
| Wall-Mounted Cupboard |
If the microwave is mounted inside a wall-mounted cupboard, you’ll need to take away the cupboard from the wall earlier than you may detach the microwave. |
As soon as the microwave is indifferent from the wall, rigorously elevate it down and place it on a steady floor. Remember to assist the underside of the microwave with one hand whereas lifting it with the opposite.
Decreasing the Microwave Rigorously
After you have disconnected the microwave from the ability supply and eliminated the mounting bracket, it is time to rigorously decrease the microwave from the wall.
1. Get Assist
For bigger microwaves, enlist the assistance of a pal or member of the family to help you in decreasing it.
2. Maintain the Microwave Securely
Place your self in entrance of the microwave and grasp it firmly with each arms. Be sure that your grip is safe and balanced.
3. Decrease Slowly and Gently
Rigorously decrease the microwave in direction of the ground, sustaining a gradual and managed movement. Don’t drop or jolt the microwave at any time.
4. Assist the Microwave
In case you are unable to decrease the microwave utterly to the ground, place a sturdy field or desk beneath it to assist its weight.
5. Clear the Manner
Earlier than decreasing the microwave, be certain that the trail to the ground is evident of any obstacles or tripping hazards.
6. Tilt and Take away
If the microwave is near the ground however not fairly touching it, rigorously tilt it ahead and pull it away from the wall. This step requires further care to stop any injury or damage.
| Step | Description |
|---|---|
| 1 | Flip off breaker |
| 2 | Take away faceplate |
| 3 | Unscrew mounting bracket |
| 4 | Disconnect wiring |
| 5 | Decrease microwave |
| 6 | Tilt and take away |
Eradicating the Again Cowl
Earlier than you begin, collect your instruments and supplies. You may want a Phillips head screwdriver, a flathead screwdriver, and a pair of needle-nose pliers. You may additionally want a flashlight that can assist you see contained in the microwave.
After you have your instruments and supplies, comply with these steps to take away the again cowl of your microwave:
1. Unplug the microwave from the wall outlet.
2. Take away the screws which are holding the again cowl in place. These screws are usually situated on the highest and backside of the again cowl.
3. Rigorously elevate the again cowl off the microwave. Watch out to not injury the wires or different elements contained in the microwave.
4. Set the again cowl apart in a secure place.
| High 5 Microwave Manufacturers | Market Share |
|---|---|
| Samsung | 25% |
| LG | 20% |
| Whirlpool | 15% |
| GE | 12% |
| KitchenAid | 10% |
5. Examine the within of the microwave for any injury. Should you see any injury, don’t use the microwave. Contact a certified restore technician instantly.
6. If the within of the microwave appears to be like okay, you may proceed with the following step.
7. Find the capacitor. The capacitor is a big, cylindrical element that’s usually situated on the left facet of the microwave. It’s often lined by a plastic or steel casing.
8. Rigorously discharge the capacitor. To do that, use a pair of needle-nose pliers to the touch the 2 terminals on the capacitor. You will notice a spark when the capacitor discharges.
Disconnecting Inner Wires
7. Establish and Disconnect the Energy Wire: Find the thick, insulated wire linked to the circuit breaker. That is the ability wire. Grip the wire with insulated pliers and pull it straight out of the terminal block.
8. Disconnect the Different Wires: Across the energy wire, you will discover smaller wires of various colours. These are the bottom, impartial, and management wires. Observe these steps to disconnect them:
- Impartial Wire (White): Grip the white wire with pliers and pull it straight out of the impartial terminal block.
- Floor Wire (Inexperienced or Naked Copper): Grip the inexperienced or naked copper wire with pliers and pull it straight out of the bottom terminal block.
- Management Wires: These wires are often black, purple, or yellow. They hook up with the management panel of the microwave. Establish the terminal blocks the place they join and pull every wire straight out.
9. Wrap and Safe the Wires: As soon as all of the wires are disconnected, wrap them along with electrical tape to stop any electrical shorts. Safe the wires out of the way in which utilizing zip ties or wire clips.
| Wire Sort | Terminal Block Colour |
|---|---|
| Energy | Crimson/Black |
| Impartial | White |
| Floor | Inexperienced/Naked Copper |
| Management | Varies (Black, Crimson, Yellow) |
Eradicating the Magnetron and Transformer
9. Disconnecting the Electrical Connections
As soon as the magnetron and transformer are uncovered, you will have to disconnect {the electrical} connections. These connections will differ relying on the particular mannequin of microwave you’ve gotten, however they will usually contain a couple of screws or terminals.
To disconnect {the electrical} connections, comply with these steps:
- Establish {the electrical} connections on the magnetron and transformer.
- Use a screwdriver to take away the screws or terminals that safe the connections.
- Gently pull the wires away from the magnetron and transformer. Watch out to not injury the wires.
As soon as {the electrical} connections are disconnected, you may take away the magnetron and transformer from the microwave.
| Sort of Connection | Find out how to Disconnect |
|---|---|
| Screw terminal | Use a screwdriver to take away the screw. |
| Push-on terminal | Gently pull the wire away from the terminal. |
| Soldered connection | Use a soldering iron to soften the solder and disconnect the wires. |
Disconnect the Microwave
Earlier than you start, disconnect the microwave from the ability outlet. It will stop any electrical shocks or injury to the microwave.
Take away the Mounting Screws
Find the screws that mount the microwave to the wall. These are usually situated on the highest and backside of the microwave. Take away the screws utilizing a screwdriver.
Carry the Microwave
Grip the microwave firmly on each side. Carry the microwave straight up and off the wall. Watch out to not injury the wall or the microwave.
Decrease the Microwave
Decrease the microwave to a desk or countertop. Don’t drop the microwave, as this might injury it.
Clear the Wall
Use a moist fabric to scrub the wall the place the microwave was mounted. It will take away any mud or particles that will have amassed.
Clear the Microwave
Clear the microwave completely earlier than utilizing it once more. It will take away any meals residue or grease that will have amassed.
Safely Disposing of the Microwave
Examine Native Laws
Examine together with your native waste administration authority for directions on find out how to get rid of a microwave oven. Some localities have particular necessities for the disposal of digital waste.
Contact a Recycling Middle
Contact an area recycling heart to see in the event that they settle for microwaves. Some recycling facilities specialize within the recycling of digital waste.
Contact the Producer
Contact the producer of your microwave to see if they’ve any recycling or disposal applications. Some producers supply applications for the secure disposal of their merchandise.
Use a Waste Disposal Service
Contact a waste disposal service that focuses on the disposal of digital waste. These companies will usually cost a price for his or her companies.
| Disposal Methodology | Professionals | Cons |
|---|---|---|
| Native waste administration authority | Typically free | Might have particular necessities |
| Recycling heart | Recycles supplies | Might not settle for all microwaves |
| Producer | Might have recycling applications | Will not be handy |
| Waste disposal service | Handy | Usually prices a price |
Find out how to Take away a Wall Microwave
To take away a wall microwave, comply with these steps:
1.
Flip off the ability to the microwave on the circuit breaker.
2.
Open the microwave door and take away the turntable and some other detachable components.
3.
Find the screws which are holding the microwave to the wall and take away them.
4.
Rigorously pull the microwave away from the wall, being cautious to not injury {the electrical} wire.
5.
Disconnect {the electrical} wire from the wall outlet.
6.
Take away the microwave from the mounting bracket.
Folks Additionally Ask
How do I take away a microwave that’s constructed into a cupboard?
To take away a microwave that’s constructed into a cupboard, comply with these steps:
1.
Open the microwave door and take away the turntable and some other detachable components.
2.
Find the screws which are holding the microwave to the cupboard and take away them.
3.
Rigorously pull the microwave away from the cupboard, being cautious to not injury {the electrical} wire.
4.
Disconnect {the electrical} wire from the wall outlet.
5.
Take away the microwave from the mounting bracket.
How do I take away a microwave that’s hanging on a bracket?
To take away a microwave that’s hanging on a bracket, comply with these steps:
1.
Flip off the ability to the microwave on the circuit breaker.
2.
Open the microwave door and take away the turntable and some other detachable components.
3.
Find the screws which are holding the microwave to the bracket and take away them.
4.
Rigorously pull the microwave away from the bracket, being cautious to not injury {the electrical} wire.
5.
Disconnect {the electrical} wire from the wall outlet.
6.
Take away the microwave from the wall.
