Have you ever ever discovered your self struggling to take away the PUR water filter out of your pitcher? In that case, you are not alone. Many individuals discover this activity to be surprisingly tough. Nonetheless, with the fitting directions, it may be achieved shortly and simply. On this article, we’ll give you a step-by-step information on tips on how to take away a PUR water filter out of your pitcher. We will even embody some ideas and methods to make the method even simpler.
Step one is to find the filter launch button. This button is often positioned on the underside of the pitcher. After getting discovered the button, press it and maintain it down. Whereas holding down the button, gently pull up on the filter. The filter ought to come out simply. If it doesn’t, strive wiggling it backwards and forwards whereas pulling up. As soon as the filter is out, you may discard it and exchange it with a brand new one.
Listed below are some ideas and methods to make the method even simpler: If the filter is caught, you may strive utilizing a pair of pliers to take away it. Watch out to not harm the filter or the pitcher. You can too strive operating sizzling water over the filter to loosen it up. In case you are having bother discovering the filter launch button, you may seek the advice of your pitcher’s consumer handbook. With the following pointers and methods, you need to be capable of take away a PUR water filter out of your pitcher shortly and simply.
Find the Filter Housing
Figuring out the filter housing in your PUR water pitcher is essential earlier than initiating the filter elimination course of. Here is how one can find the housing:
1. Establish the Lid: The filter housing is positioned beneath the lid of the pitcher. Find the lid, which is often on the high of the pitcher, and unlatch or unscrew it to disclose the filter housing.
2. Study the Base: In some PUR pitchers, the filter housing is built-in into the bottom. Test the underside of the pitcher for a cylindrical or rectangular housing that extends beneath the water reservoir.
3. Test the Reservoir: The filter housing could also be submerged throughout the water reservoir. Examine the reservoir for a protruding or removable half that incorporates the filter.
| Pitcher Kind | Filter Housing Location |
|---|---|
| Conventional PUR Pitcher | Underneath the lid |
| PUR Superior Water Filtration Pitcher | Throughout the base |
| PUR Final Water Filtration Pitcher | Submerged within the reservoir |
Launch the Filter Housing
To launch the filter housing in your PUR pitcher, observe these steps:
1. Establish the Filter Housing Lock
Find the small, round lock on the highest of the filter housing. It could have a notch or tab that you could seize.
2. Depress the Filter Housing Lock
Press down on the filter housing lock along with your thumb or finger. It will disengage the lock.
3. Twist the Filter Housing Counterclockwise
Whereas urgent down on the lock, twist the filter housing counterclockwise to launch it from the pitcher. The filter housing ought to come off simply.
4. Take away the Used Filter
As soon as the filter housing is launched, you may take away the outdated filter cartridge from the within. Merely pull it straight up and discard it.
Grip and Take away the Filter
To take away the PUR water filter from the pitcher, observe these steps:
-
Find the filter’s tab: On the underside of the filter, one can find a small tab. This tab is used to grip and take away the filter.
-
Grip the tab: Use your thumb and index finger to grip the tab firmly.
-
Pull the filter straight up: Whereas gripping the tab, pull the filter straight up and out of the pitcher. Keep away from twisting or turning the filter as it could get caught or break.
Here is an in depth clarification of step 3:
- Firmly grasp the filter’s tab: Guarantee you have got a safe grip on the tab to forestall it from slipping.
- Use an upward power: Gently however firmly pull the filter upwards, sustaining a straight movement.
- Keep away from twisting: Resist the urge to twist or flip the filter throughout elimination. This will pressure the filter’s connection factors and probably harm the filter or pitcher.
- Pull to the highest: Proceed pulling the filter upwards till it fully disengages from the pitcher.
Insert the New Filter
Now that your outdated filter is eliminated, it is time to insert the brand new one. Take the brand new filter out of its packaging and examine it for any harm. If there’s any harm, don’t use the filter. As a substitute, return it to the shop or contact the producer.
After getting inspected the filter, maintain it the wrong way up and gently shake it to take away any unfastened particles.
5. Align the Filter With the Pitcher
The following step is to align the filter with the pitcher. To do that, maintain the filter in a single hand and the pitcher within the different. Insert the pointed finish of the filter into the outlet within the backside of the pitcher. Ensure that the filter is aligned correctly in order that the water can move by way of it. The filter could have some pushback once you begin to insert it. You could want to use some downward stress to get it began. As soon as the pointed finish of the filter is inserted, the remainder of the filter ought to fall into place.
Lock the Filter Housing
The ultimate step in eradicating a PUR water filter from a pitcher is to lock the filter housing securely in place. This step ensures that the water will move by way of the brand new filter and never leak round it. Comply with these steps to lock the filter housing:
1. Maintain the filter housing the wrong way up.
2. Insert the brand new filter into the filter housing, making certain that it’s correctly seated.
3. Flip the filter housing clockwise a couple of quarter of a flip.
4. Cease turning once you really feel resistance.
5. The filter housing is now locked in place.
Further Suggestions:
- Don’t overtighten the filter housing, as this could harm the filter or the pitcher.
- If in case you have issue locking the filter housing, strive utilizing a moist fabric or paper towel to grip it.
| Step | Motion |
|---|---|
| 1 | Maintain the filter housing the wrong way up |
| 2 | Insert the brand new filter into the filter housing, making certain that it’s correctly seated |
| 3 | Flip the filter housing clockwise a couple of quarter of a flip |
| 4 | Cease turning once you really feel resistance |
| 5 | The filter housing is now locked in place |
Flush the Filter
8. **Flush the Filter (Non-compulsory):** Flushing the filter earlier than inserting it into the pitcher ensures that any unfastened carbon particles are eliminated. To flush the filter:
| Step | Motion |
|---|---|
| a | Take away the filter from its packaging. |
| b | Maintain the filter upright in your hand. |
| c | Run chilly water over the filter for 15 seconds. |
| d | Shake the filter gently to take away any extra water. |
| e | Insert the filter into the pitcher as instructed. |
Take away the Filter Indicator
After changing the filter, you might want to reset the filter indicator. To do that:
- Press and maintain the “Filter Indicator” button for five seconds.
- The filter indicator will flash as soon as, then flip off.
- The filter indicator is now reset.
Reset the Filter Indicator
The filter indicator gentle will flip pink when it is time to exchange the filter. To reset the filter indicator:
- Take away the outdated filter and insert a brand new one.
- Fill the pitcher with chilly water.
- Press and maintain the “Filter Indicator” button for five seconds.
- The filter indicator gentle will flip inexperienced.
- The filter indicator is now reset.
Detailed Steps for Resetting the Filter Indicator
- Find the Filter Indicator Button: The button is often positioned on the entrance of the pitcher, close to the highest.
- Press and Maintain: Press and maintain the “Filter Indicator” button for about 5 seconds.
- Launch the Button: As soon as the filter indicator gentle flashes as soon as and turns off, launch the button.
- Test the Indicator: The filter indicator ought to now be reset and can flip inexperienced when a brand new filter is put in.
How To Take away PUR Water Filter From Pitcher
1. Collect Your Supplies
You will want:
– A PUR water pitcher with a filter
– A big bowl or bucket
– A pair of pliers (non-compulsory)
2. Empty the Pitcher
Pour out any remaining water from the pitcher.
3. Take away the Lid
Push the button on the highest of the pitcher to launch the lid.
4. Find the Filter Launch Button
Discover the small button positioned on the underside of the pitcher, close to the bottom of the filter.
5. Press the Filter Launch Button
Press the button and maintain it down.
6. Grasp the Filter
Attain into the pitcher and grasp the filter.
7. Pull the Filter Straight Up
Gently pull the filter straight up and out of the pitcher.
8. Rinse the Pitcher
Rinse the pitcher completely with clear water.
9. Insert the New Filter
Insert the brand new filter into the pitcher.
10. Press the Filter Into Place
Press the filter down firmly till it clicks into place. Be sure that the filter is seated correctly and there are not any gaps across the edges.
11. Substitute the Lid
Put the lid again on the pitcher and press down till it clicks into place.
12. Fill the Pitcher with Water
Fill the pitcher with chilly water and let it sit for five minutes.
13. Get pleasure from Clear Filtered Water
Your water is now filtered and able to drink.
How To Take away PUR Water Filter From Pitcher
To take away a PUR water filter from a pitcher, observe these steps:
- Empty the pitcher’s water right into a sink or different container.
- Flip the lid of the pitcher over ( it must be the wrong way up)
- Press on the filter’s lid and switch to unlock it.
- Pull the filter straight up and out of the pitcher.
- Discard the outdated filter in line with your native laws.
Observe: Some PUR pitchers have a special filter design. In case your pitcher has a small, spherical filter, you will want to take away the lid after which pull a small tab on high of the filter to launch it.
Folks additionally ask about How To Take away PUR Water Filter From Pitcher
How usually ought to I exchange my PUR water filter?
It’s endorsed to switch your PUR water filter each 2 months or 100 gallons of water, whichever comes first.
How do I do know when it is time to exchange my PUR water filter?
There are a couple of indicators that it is time to exchange your PUR water filter, together with:
- The water move from the pitcher has slowed down.
- The water tastes or smells dangerous.
- The filter has turned brown or black.
What are the advantages of utilizing a PUR water filter?
PUR water filters successfully take away a variety of contaminants from faucet water, together with lead, chlorine, and micro organism. This will enhance the style, scent, and security of your consuming water.
