Hanging a microwave below the cupboard is a good way to avoid wasting counter area and hold your kitchen wanting organized. However with so many several types of microwaves and cupboards, it may be troublesome to know the place to begin.
Listed below are a couple of suggestions that can assist you get began: First, it is advisable to select the correct microwave. Not all microwaves are designed to be hung below a cupboard. Make certain to examine the producer’s directions earlier than you buy a microwave.
After you have chosen a microwave, it is advisable to discover the correct spot. The microwave ought to be hung at a top that’s comfy so that you can attain and use. You also needs to ensure that the microwave shouldn’t be too near the cupboard above it. In any other case, the door could not open correctly.
After you have discovered the correct spot, it is advisable to mount the microwave. There are a couple of other ways to mount a microwave below a cupboard. You should use a bracket, a countertop mount, or a wall mount. One of the simplest ways to mount a microwave will depend upon the kind of microwave you will have and the kind of cupboard you will have.
Making ready the Cupboard and Microwave
Making ready the Cupboard
1. Measure and mark the placement of the microwave on the underside of the cupboard. Make sure the chosen spot gives sufficient clearance for the microwave’s door and air flow.
2. Verify for obstructions, equivalent to wires or pipes, which will hinder the set up.
3. Assemble the mounting bracket that can help the microwave. Comply with the producer’s directions to make sure correct meeting.
4. Place the mounting bracket within the marked location and safe it with screws or bolts.
5. Make sure the mounting bracket is degree and durable earlier than continuing to the following step.
Making ready the Microwave
1. Unpack the microwave and take away all protecting supplies.
2. Measure the gap between the mounting holes on the again of the microwave.
3. Find the mounting holes on the mounting bracket that correspond to the microwave’s measurements.
4. Carry the microwave and align it with the mounting bracket.
5. Slowly slide the microwave onto the bracket, guaranteeing it suits securely.
6. Tighten the screws or bolts that maintain the microwave in place.
7. Join the microwave to an influence outlet and examine that it’s functioning appropriately.
Putting in the Mounting Bracket
The mounting bracket is a vital part that gives stability and help in your microwave when put in below a cupboard. To make sure a safe set up, observe these steps fastidiously:
1. Measure and Mark the Bracket Place
Use a measuring tape to find out the specified top and site of the microwave below the cupboard. Mark the corresponding factors on the wall the place the bracket might be mounted.
2. Put together the Wall
Verify the wall materials to make sure it will possibly help the load of the microwave. If vital, use applicable anchors or wall plugs to strengthen the mounting floor.
3. Place and Safe the Bracket
Align the mounting bracket with the marked factors on the wall and safe it firmly utilizing the offered screws or bolts. Make sure the bracket is degree and securely mounted to the wall. It’s essential to make use of screws or bolts which can be the suitable size and diameter for the load of the microwave and the energy of the wall materials.
Screw and Bolt Specs
| Screw/Bolt Sort | Diameter | Size |
|---|---|---|
| Wooden Screws | #8 or #10 | 1 1/4″ – 2″ |
| Lag Bolts | 1/4″ | 2″ – 3″ |
| Plated Wall Anchors | N/A | 2″- 4″ |
As soon as the mounting bracket is securely in place, you’ll be able to proceed to the following step of the set up course of, which entails attaching the microwave to the bracket.
Securing the Microwave
Selecting the Mounting {Hardware}
Choose mounting {hardware} that’s suitable along with your microwave and cupboard. Widespread {hardware} choices embrace mounting brackets, screws, and anchors.
Gathering Instruments
Collect the mandatory instruments for the job, equivalent to a drill, screwdriver, degree, and measuring tape.
Marking the Mounting Holes
Measure the gap between the mounting holes on the microwave’s again and mark the corresponding places on the underside of the cupboard.
Drilling Pilot Holes
Use a drill with a smaller bit than the screws to drill pilot holes on the marked places. It will assist information the screws and forestall splitting the wooden.
Putting in the Mounting Brackets
Align the mounting brackets with the pilot holes and safe them with screws. Be sure that the brackets are degree and tightly mounted.
Mounting the Microwave
Carry the microwave onto the mounting brackets and align the mounting holes. Insert screws and tighten them till the microwave is securely hooked up.
Leveling the Microwave
Use a degree to examine the microwave’s alignment and alter the mounting screws as wanted to make sure it’s degree.
Further Ideas for Securing the Microwave:
* Use heavy-duty mounting {hardware} to help the load of the microwave.
* Verify the microwave’s person guide for particular mounting directions.
* Search skilled help if you’re not assured in performing the set up your self.
* Guarantee there’s adequate air flow across the microwave to forestall overheating.
Connecting the Microwave
As soon as the mounting bracket is securely put in, it is time to join the microwave.
Electrical Connection
Join the microwave’s electrical wire to a grounded, three-prong outlet. The outlet ought to be devoted for the microwave and never shared with different home equipment.
Vent Connection (for Over-the-Vary Microwaves)
In case your microwave has a built-in vent fan, it is going to have to be linked to an exterior exhaust duct. Consult with your microwave’s person guide for particular directions on how you can join the vent.
Fuel Connection (for Fuel Microwaves)
Fuel microwaves require a fuel line connection. This ought to be put in by a professional fuel technician.
Desk: Connecting the Microwave
| Connection Sort | Required Elements |
|---|---|
| Electrical | Microwave electrical wire, grounded three-prong outlet |
| Vent (Over-the-Vary) | Microwave vent adapter, exhaust duct |
| Fuel | Microwave fuel hose, fuel line connection |
As soon as all connections are safe, you’ll be able to activate the microwave and take a look at it to make sure it’s working correctly.
Testing the Set up
1. Plug the microwave into an accessible outlet. Confirm that the microwave is useful by choosing the “30 seconds” function (or related) and putting a 1-cup of water inside. Press “Begin” and observe the microwave for 30 seconds.
2. As soon as the water boils, enable the microwave to chill for a couple of minutes. Open the microwave door and take away the water cup fastidiously.
3. Visually examine the set up for any seen indicators of injury or defects. Search for any unfastened screws, cracks, deformations, or every other abnormalities.
4. Check the microwave door by opening and shutting it a number of occasions. Be sure that the door operates easily and closes securely with none gaps or obstacles.
5. Check the microwave turntable by putting a light-weight object within the heart of the plate. Shut the door and activate the microwave for a couple of seconds. Observe if the turntable rotates easily and evenly.
6. Verify the microwave’s lighting by urgent the “Mild” button (if the microwave has this function). Confirm that the sunshine activates and off with none flickering or dimming.
7. Use the microwave for a couple of minutes to carry out further exams. Warmth a easy dish or a cup of water to evaluate the microwave’s efficiency, performance, and even heating distribution. Observe the microwave’s operation, hear for any uncommon noises, and examine the heated meals for any unevenness or inconsistencies.
Putting in the Microwave Bracket
Securely connect the microwave bracket to the underside of the cupboard, guaranteeing it’s degree and aligned with the microwave’s mounting holes.
Hanging the Microwave
Fastidiously carry the microwave and slide it onto the bracket, aligning the mounting holes. Safe the microwave to the bracket utilizing the offered bolts or screws.
Tightening the Screws
Use a screwdriver to tighten the screws that maintain the microwave to the bracket, guaranteeing they’re firmly secured.
Connecting the Energy Twine
Insert the facility wire into the outlet and guarantee it’s securely plugged in.
Testing the Microwave
Activate the microwave and run it at low energy for a couple of minutes to confirm whether it is functioning correctly.
Troubleshooting Widespread Points
Microwave Does not Flip On
Verify if the facility wire is plugged in and the outlet is working. Whether it is, reset the microwave by unplugging it and plugging it again in.
Microwave Turns On However Does not Warmth Meals
Make certain the microwave door is closed correctly and the door switches are functioning. Be sure that the turntable is rotating freely and that there isn’t a obstruction contained in the microwave.
Microwave Sparks or Smokes
Instantly flip off the microwave and unplug it. Clear the microwave totally, take away any steel utensils, and guarantee there are not any meals spills or grease buildup inside. If the issue persists, contact a professional technician.
| Microwave Measurement | Beneficial Cupboard Top |
|---|---|
| 1.5 cubic toes or much less | 18 inches |
| 1.6 to 2.0 cubic toes | 21 inches |
| 2.1 to 2.5 cubic toes | 24 inches |
Skilled Set up Choices
1. Rent a Licensed Electrician
That is probably the most really helpful possibility if you’re not assured in your DIY abilities or if the set up requires advanced electrical work. A licensed electrician will be sure that the microwave is put in safely and meets all electrical codes.
2. Contact the Microwave Producer
Some microwave producers provide skilled set up providers for an extra price. This generally is a handy possibility if you wish to be sure that the set up is finished appropriately by licensed technicians.
3. Use a Residence Enchancment Service
Many dwelling enchancment shops and providers provide microwave set up as a part of their providers. These providers sometimes embrace supply, set up, and any vital electrical work.
4. Rent a Handyman
If you’re searching for a inexpensive possibility, you’ll be able to rent a handyman to put in your microwave. Nevertheless, ensure that the handyman has expertise in putting in microwaves and might present references.
5. Hire a Instrument
If you’re comfy with DIY initiatives, you’ll be able to lease a microwave mounting bracket instrument from a ironmongery shop. These instruments make it simpler to align and safe the microwave below the cupboard.
6. Use a Mounting Plate
A mounting plate is a steel bracket that attaches to the underside of the microwave and gives a safe floor for mounting. It is a good possibility if the underside of your cupboard shouldn’t be flat or if you wish to keep away from drilling holes into the cupboard.
7. Use a Microwave Hood Mixture
A microwave hood mixture is a single unit that mixes a microwave and a spread hood. It is a space-saving possibility that’s superb for kitchens with restricted area.
8. Construct a Customized Shelf
You probably have a big microwave or wish to create a extra customized look, you’ll be able to construct a customized shelf to help the microwave. This feature requires extra DIY abilities however can present a extra customized answer.
9. Use a Cupboard-Mounted Microwave
Cupboard-mounted microwaves are designed to be put in inside a cupboard, offering a seamless look and saving countertop area. It is a good possibility when you’ve got a big kitchen.
10. Contemplate the Following Elements When Selecting a Skilled Microwave Set up Possibility
| Issue | Rationalization |
|---|---|
| Value | Skilled set up prices can fluctuate relying on the choice you select and the complexity of the job. |
| Comfort | Some choices, equivalent to hiring a licensed electrician or utilizing a house enchancment service, provide extra comfort. |
| Expertise | Be sure that the installer you select has expertise in putting in microwaves. |
| Security | Electrical work ought to be completed by a professional electrician to make sure security. |
| Guarantee | Some set up providers could provide a guaranty on their work. |
How To Hold Microwave Underneath Cupboard
Hanging a microwave below a cupboard may be a good way to avoid wasting counter area and make your kitchen look extra organized. It is also a comparatively simple venture that may be accomplished in a couple of hours.
Listed below are the steps on how you can dangle a microwave below a cupboard:
1. Collect your supplies. You will want a microwave, a drill, a screwdriver, a degree, a pencil, and a stud finder.
2. Discover a appropriate location. The microwave ought to be mounted below a cupboard that’s no less than 30 inches above the ground. The cupboard also needs to be huge sufficient to accommodate the microwave.
3. Mark the placement of the mounting holes. Use a degree to ensure that the microwave is degree. Then, use a pencil to mark the placement of the mounting holes.
4. Drill the mounting holes. Use a drill to drill the mounting holes. The holes ought to be deep sufficient to accommodate the screws.
5. Insert the screws. Insert the screws into the mounting holes. Tighten the screws till the microwave is securely mounted.
6. Plug within the microwave. Plug the microwave into an outlet. Activate the microwave to ensure that it’s working correctly.
