Changing the water filter in your Kenmore fridge is a straightforward activity that may be accomplished in a couple of minutes. It will guarantee clear, fresh-tasting water out of your fridge’s dispenser. A clogged filter may cause a lower in water stream, a wierd style in your water, and even ice buildup within the ice maker. Altering the filter often will assist forestall these issues and preserve your fridge working effectively.
Earlier than you start, find the water filter. It’s sometimes discovered within the higher proper nook of the contemporary meals compartment, behind the highest shelf. After getting positioned the filter, flip off the water provide to your fridge. There may be normally a small valve positioned behind the fridge that you may flip off. As soon as the water provide is turned off, depress the eject button on the filter housing and pull the filter straight all the way down to take away it. Then, take away the brand new filter from its packaging and insert it into the housing. Push up on the filter till it clicks into place. Lastly, flip the water provide again on and run water by way of the dispenser for a couple of minutes to flush out any remaining air.
Altering the water filter in your Kenmore fridge is a fast and straightforward activity that may be accomplished in a couple of minutes. By following these easy steps, you may be certain that your fridge is shelling out clear, fresh-tasting water.
Figuring out the Water Filter Location
Finding the water filter in your Kenmore fridge is essential for making certain a gentle provide of unpolluted, filtered water. The filter’s placement varies relying on the particular fridge mannequin.
Entrance-Mounted Filters
Many Kenmore fridges characteristic front-mounted water filters, positioned on the underside or center grille on the entrance of the unit. To determine such a filter:
- Examine the underside or center grille of your fridge for a small, round opening.
- In case you see a plastic knob or indentation close to the opening, gently pull or press it to launch the filter cartridge.
- As soon as the cartridge is out, verify its packaging or the consumer handbook for the particular mannequin quantity and alternative directions.
Rear-Mounted Filters
Some Kenmore fridges, notably side-by-side or French door fashions, have rear-mounted water filters. To find such a filter:
- Find the panel protecting the again of the fridge compartment (normally on the high).
- Take away the panel by unscrewing any screws or clips holding it in place.
- Behind the panel, it’s best to see the water filter cartridge inside a housing or bracket.
- Examine the packaging or consumer handbook for the particular mannequin quantity and alternative directions.
| Sort | Location |
|---|---|
| Entrance-Mounted | Backside or center grille on the entrance |
| Rear-Mounted | Behind the panel protecting the again of the fridge compartment |
Gathering the Obligatory Instruments
To interchange the water filter in your Kenmore fridge, you’ll need the next instruments:
- A brand new Kenmore water filter (mannequin quantity 46-9990)
- A bucket or bowl (to catch any water that will leak out)
- A clear fabric or paper towels (to wipe up any spills)
- A Phillips head screwdriver (optionally available)
Selecting the Proper Water Filter
The Kenmore 46-9990 water filter is the one filter that’s suitable with all Kenmore fridges. You will need to use the proper filter to make sure that your fridge is functioning correctly.
Location of the Water Filter
The water filter is usually positioned within the decrease right-hand nook of the fridge, behind the grill. To entry the filter, you’ll need to take away the grill by gently pulling it up and away from the fridge.
Instruments for Eradicating the Outdated Filter
After getting positioned the water filter, you’ll need to make use of a Phillips head screwdriver to take away the screws that maintain it in place. Watch out to not overtighten the screws whenever you change the brand new filter.
Security Precautions
Earlier than you start working in your fridge, it is very important unplug it from {the electrical} outlet. It will assist to stop you from getting shocked. You also needs to flip off the water provide to the fridge to stop water from leaking out whenever you take away the previous filter.
Shutting Off the Water Provide
Earlier than you start altering the water filter, it is important to close off the water provide to keep away from any surprising leaks or spills. This is a step-by-step information that can assist you do it:
- Find the water provide valve: This valve is usually positioned behind or beneath the fridge, close to the inlet hose. It could have a small deal with or knob that you may flip.
- Flip off the valve: If the valve has a deal with, flip it clockwise to shut it. If it has a knob, flip it to the “off” place.
- Drain the remaining water within the line: To make sure that there isn’t any water left within the line that might leak out whereas altering the filter, open the water dispenser or faucet on the fridge to launch the remaining water. Let it drain till no extra water comes out.
Extra Suggestions for Shutting Off the Water Provide
* If you cannot find the water provide valve, discuss with your fridge’s consumer handbook for particular directions.
* If the valve is tough to show, use a wrench to softly tighten it, however don’t overtighten it.
* In case you expertise any leaks or harm whereas shutting off the water provide, contact a professional plumber instantly.
Eradicating the Outdated Filter
Find the water filter housing. It’s sometimes discovered within the fridge compartment or behind the grille on the backside of the fridge.
Flip off the water provide to the fridge. That is normally finished by closing the water valve that’s positioned close to the water filter housing.
Unpack the brand new water filter and take away the protecting cap from the ends of the filter.
Maintain the discharge button on the water filter housing and pull the previous filter straight all the way down to take away it.
The previous water filter will include residual water, so watch out to not spill it.
Get rid of the previous water filter correctly.
Putting in the New Filter
After getting positioned the previous filter, it is time to change it with a brand new one. This is an in depth step-by-step information:
-
Shut the Water Provide Valve: Flip off the water provide valve positioned close to the fridge. It will forestall water from leaking throughout the filter change.
-
Relieve Water Stress: Press the water dispenser button for a number of seconds to launch any residual water stress within the strains.
-
Disconnect the Outdated Filter: Grip the previous filter and gently twist it counterclockwise to disconnect it from the housing. Don’t use extreme pressure.
-
Put together the New Filter: Take away the brand new filter from its packaging and soak it in chilly water for about 2-3 minutes. This helps activate the filter media.
-
Insert the New Filter: Insert the brand new filter into the housing by aligning the notch on the filter with the corresponding notch within the housing. Push the filter up and twist it clockwise till it clicks into place. Keep away from overtightening.
Desk: Key Factors for Putting in the New Filter
| Step | Key Level |
|---|---|
| 1 | Shut the water provide valve. |
| 2 | Relieve water stress by urgent the water dispenser. |
| 3 | Disconnect the previous filter by twisting counterclockwise. |
| 4 | Soak the brand new filter in water for activation. |
| 5 | Align the filter notch with the housing notch and twist clockwise to safe it. |
Resetting the Filter Indicator
After getting efficiently changed the water filter, it is vital to reset the filter indicator in order that it could possibly precisely observe the remaining lifespan of the brand new filter. This is a step-by-step information on methods to reset the filter indicator in your Kenmore fridge:
- Find the Filter Indicator: The filter indicator is usually positioned on the fridge’s management panel or dispenser. It could be a small gentle or an icon that shows the filter’s standing.
- Press and Maintain the Button: Discover the button or mixture of buttons that’s used to reset the filter indicator. This may increasingly differ relying in your particular Kenmore mannequin. Check with your consumer handbook or search for labels on the management panel.
- Maintain for the Specified Period: Press and maintain the designated button or buttons for the period of time laid out in your consumer handbook. That is sometimes round 5-10 seconds.
- Launch the Button: As soon as the required time has elapsed, launch the button. The filter indicator ought to now be reset and show the standing of the brand new filter.
- Examine the Indicator: After resetting the filter indicator, make it possible for it appropriately signifies the brand new filter as “good” or “OK.” If the indicator nonetheless reveals “change” or “unhealthy,” repeat the reset course of.
- Set the Filter Life: Some Kenmore fridges let you set the lifespan of the brand new filter. This helps the indicator present correct reminders for future filter replacements. Check with your consumer handbook to seek out the directions on methods to set the filter life.
Troubleshooting Frequent Points
In case you encounter any points whereas altering the water filter in your Kenmore fridge, discuss with the next troubleshooting suggestions:
1. Water Nonetheless Meting out
Guarantee the brand new filter is securely tightened by hand. If it is overtightened, it might crack or leak. If it isn’t tight sufficient, water might leak. Examine for any particles or particles blocking the filter’s outlet or inlet.
2. Water Discolored
If the water popping out is discolored, run the water by way of the dispenser for a couple of minutes. It will flush out any trapped air or particles. If the water stays discolored, change the filter or contact a professional technician.
3. Low Water Stress
Low water stress could be brought on by clogged filters or strains. Change the filter and verify for any obstructions within the water strains.
4. Water Filter Not Disconnected
Earlier than eradicating the previous filter, make sure the water provide has been disconnected. It will forestall water from leaking on the ground.
5. Water Filter Caught
If the filter is caught, use a filter wrench or pliers to softly loosen it. Don’t apply extreme pressure, as it might harm the filter or the fridge.
6. Water Leakage
If water leaks from the filter, guarantee it’s correctly seated and tightened. Examine for any cracks or harm to the filter. If the leak persists, change the filter.
7. Reset Water Filter Indicator
Some Kenmore fridges have a water filter indicator that must be reset after altering the filter. To reset the indicator:
- Find the “Filter Indicator” button on the dispenser or management panel.
- Press and maintain the button for 3-5 seconds till the indicator gentle adjustments coloration or resets.
- Check with your Kenmore fridge handbook for particular directions on resetting the filter indicator.
Upkeep Suggestions for Optimum Efficiency
1. Change the Water Filter Commonly
Check with your fridge’s consumer handbook for the really useful alternative schedule. As a common rule, filters must be changed each six months or in keeping with the producer’s directions.
2. Clear the Water Dispenser
Wipe down the outside of the water dispenser with a moist fabric. Keep away from utilizing harsh chemical compounds or abrasives.
3. Flush the Water Strains
Periodically, run water by way of the dispenser for a couple of minutes to filter out any built-up sediment or impurities.
4. Clear the Ice Maker
In case your fridge has an ice maker, clear it in keeping with the producer’s directions. It will assist forestall ice buildup and be certain that the ice cubes are clear and free from odors.
5. Maintain the Fridge Clear
Wipe down the inside and exterior of the fridge often to stop the buildup of spills, crumbs, and different particles.
6. Unplug the Fridge Throughout Prolonged Absences
If you can be away from dwelling for an prolonged interval, unplug the fridge to preserve power and stop potential harm.
7. Examine the Door Gaskets
Examine the door gaskets often to make sure that they aren’t torn or cracked. If the gaskets are broken, they will permit chilly air to flee, resulting in power loss and diminished cooling effectivity.
8. Keep away from Overcrowding the Fridge
Overcrowding the fridge can limit airflow, hindering the cooling course of. Guarantee that there’s satisfactory house round meals gadgets to permit air to flow into freely.
Advantages of Commonly Altering the Water Filter
Commonly altering the water filter in your Kenmore fridge gives quite a few advantages:
Improved Water Style and Odor
A contemporary filter removes impurities and contaminants out of your water, leading to noticeably better-tasting and odor-free ingesting water. You will take pleasure in refreshing and flavorful drinks each time.
Enhanced Ice High quality
A clear filter produces clearer and purer ice cubes, free from chlorine style and unsightly odors. Your ice shall be extra aesthetically pleasing and improve the enjoyment of your chilly drinks.
Lowered Sediment Buildup
Over time, sediment can accumulate in your fridge’s water strains and home equipment. A brand new filter successfully traps these particles, stopping them from clogging and compromising the efficiency of your fridge.
Prolonged Equipment Life
By eradicating impurities and decreasing sediment buildup, an everyday filter change helps defend your fridge’s inner elements. This could prolong the lifespan of your equipment and decrease expensive repairs.
Improved Well being
Impurities and contaminants eliminated by the filter can have destructive well being results. Commonly changing the filter ensures your ingesting water is freed from dangerous substances and helps your well-being.
Enhanced Water Circulate
A clogged filter can limit water stream, impacting the effectivity of your fridge. A contemporary filter permits water to go by way of easily, sustaining optimum water stress and efficiency.
Lowered Equipment Noise
Sediment buildup may cause inner elements to work tougher and produce noise. A brand new filter minimizes this noise and promotes a quieter working fridge.
Power Financial savings
A clear filter permits your fridge to work extra effectively, utilizing much less power to chill water and produce ice. Common filter adjustments can contribute to diminished power consumption and decrease utility payments.
Peace of Thoughts
Figuring out that your ingesting water is clear and freed from contaminants gives peace of thoughts. Commonly altering the filter ensures your loved ones has entry to secure and refreshing water always.
Extra Concerns
1. Select the Proper Filter
Guarantee you choose the proper filter suitable together with your particular Kenmore fridge mannequin. Check with your consumer handbook or the producer’s web site for steerage.
2. Flip Off Water Provide
Earlier than beginning the method, flip off the water provide to the fridge. Find the water shut-off valve and shut it tightly.
3. Find the Water Filter Housing
Find the water filter housing in your fridge. It’s sometimes discovered on the within of the fridge on the again or backside.
4. Take away the Outdated Filter
Twist the previous filter counterclockwise to launch it from the housing. Pull it straight all the way down to take away it utterly.
5. Examine and Clear the Housing
As soon as the previous filter is eliminated, examine the within of the housing for any particles or contamination. Clear it with a comfortable fabric or sponge if crucial.
6. Put together the New Filter
Take away the protecting cap from the brand new filter. Soak it in chilly water for a couple of minutes to activate it, then shake off extra water.
7. Insert the New Filter
Align the brand new filter with the housing and push it straight up till it clicks into place. Twist it clockwise to safe it.
8. Flip On Water Provide and Examine for Leaks
Flip the water provide again on and verify for any leaks across the filter housing. If there are leaks, tighten the filter or contact a professional plumber.
9. Reset the Water Filter Indicator
Find the water filter indicator in your fridge’s management panel and reset it to point a brand new filter has been put in. The precise process for resetting might differ relying in your particular mannequin.
10. Flush Water Strains
After altering the filter, flush 2-3 gallons of water by way of the dispenser to take away any impurities or air pockets within the water strains. This ensures the water flowing by way of the fridge is clear and filtered.
| Motion | Estimated Time |
|---|---|
| Shut off water provide | 1 minute |
| Find water filter housing | 1-2 minutes |
| Take away previous filter | <1 minute |
| Examine and clear housing | 1-2 minutes |
| Put together new filter | <1 minute |
| Insert new filter | <1 minute |
| Activate water provide | 1 minute |
| Examine for leaks | <1 minute |
| Reset water filter indicator | <1 minute |
| Flush water strains | 5-10 minutes |
