Are you bored with your previous, rusty rubbish disposal taking on area beneath your sink? Is it making unusual noises or leaking water? In that case, it is time to substitute it. Changing a rubbish disposal is a comparatively simple activity that may be accomplished in a couple of hours. Nevertheless, earlier than you may set up a brand new disposal, it’s worthwhile to take away the previous one. Listed below are the steps on the way to take away an previous rubbish disposal:
First, it’s worthwhile to flip off the facility to the disposal. This may be completed by flipping the circuit breaker that powers the disposal or by unplugging the disposal from the outlet. As soon as the facility is off, you may disconnect the water provide to the disposal. To do that, flip off the water valve beneath the sink after which disconnect the water line from the disposal. As soon as the water is disconnected, you can begin to take away the disposal from the sink. To do that, you have to to loosen the mounting nuts that maintain the disposal in place. As soon as the nuts are unfastened, you may pull the disposal down from the sink. Watch out to not drop the disposal, as it’s heavy.
As soon as the disposal is faraway from the sink, you may disconnect {the electrical} wires that energy the disposal. To do that, merely use a screwdriver to loosen the screws that maintain the wires in place. As soon as the wires are disconnected, you may take away the disposal from the cupboard. Make sure you eliminate the previous disposal correctly. You’ll be able to both recycle it or throw it away within the trash. Now that the previous disposal is eliminated, you may set up the brand new disposal. Nevertheless, changing the disposal is a subject for one more article.
Disconnecting Water Traces
Earlier than disconnecting any water traces, be certain that the water provide to the disposal is turned off. Find the shut-off valve beneath the sink and switch it clockwise to shut it. As soon as the water is turned off, proceed with the next steps:
- Find the water traces connecting to the disposal. Sometimes, there might be two traces: one for warm water and one for chilly water. They are going to be linked to the disposal utilizing compression fittings.
- Utilizing an adjustable wrench, rigorously loosen the compression nuts that safe the water traces to the disposal. Don’t overtighten, as this could harm the nuts or fittings.
- As soon as the nuts are unfastened, gently pull the water traces away from the disposal. If they’re caught, use a pair of pliers to rigorously wiggle them unfastened.
- As soon as the water traces are disconnected, plug the open ends of the traces to stop water from leaking. You need to use rubber caps or duct tape to seal the openings.
Here’s a desk summarizing the steps for disconnecting water traces:
| Step | Description |
|---|---|
| 1 | Flip off water provide. |
| 2 | Find and loosen compression nuts. |
| 3 | Pull water traces away from disposal. |
| 4 | Plug open ends of water traces. |
Eradicating the Drain Line
4. Eradicating the Drain Line
The drain line is the pipe that connects the disposal to the sink drain. Eradicating it’s essential to fully take away the disposal unit.
4.1. Collect Your Instruments
- Adjustable wrench
- Bucket
- Rags
4.2. Detach the Drain Line
- Place the bucket beneath the drain line to catch any dripping water.
- Use the adjustable wrench to loosen the connection between the drain line and the disposal unit.
- Gently pull the drain line off the disposal.
4.3. Clear the Drain Line
- Examine the drain line for any clogs or blockages.
- Use a drain cleaner or auger to take away any particles.
- Rinse the drain line with water to filter any remaining residue.
4.4. Reattaching the Drain Line
- If the drain line is in good situation, you may reattach it to the disposal.
- Apply a small quantity of plumber’s putty to the top of the drain line.
- Tighten the connection between the drain line and the disposal unit utilizing the adjustable wrench.
Eradicating the Outdated Disposal
1. Shut Off Water and Electrical energy
Previous to commencing the removing course of, be certain that each the water provide and electrical energy to the disposal unit are turned off. Find the water shut-off valve beneath the sink and switch it clockwise to cease the water movement. Subsequent, entry the circuit breaker panel and change off the breaker supplying energy to the rubbish disposal.
2. Disconnect Water Traces
Determine the 2 water traces linked to the disposal unit: one for chilly water and one for warm water. Utilizing a pair of adjustable pliers, gently loosen the nuts that safe these traces to the disposal. Watch out to not over-tighten or harm the nuts.
3. Disconnect Drain Line
Find the drain line linked to the disposal unit and use a wrench to loosen the clamp that holds it in place. Fastidiously detach the drain line from the disposal.
4. Take away Mounting Bolts
The disposal unit is often secured to the sink flange with three or 4 mounting bolts. Utilizing a socket wrench or screwdriver, take away these bolts and gently raise the disposal unit free from the flange.
5. Clear Sink Flange
As soon as the disposal unit is eliminated, take the chance to scrub the sink flange. Take away any meals particles or particles that will have amassed across the flange. It will assist stop clogs and guarantee a correct seal when putting in the brand new disposal.
6. Examine and Clear Electrical Elements
After disconnecting the disposal unit, take a second to examine {the electrical} elements. Search for any indicators of harm, reminiscent of frayed wires or unfastened connections. In case you discover any points, seek the advice of with a certified electrician earlier than continuing additional. Moreover, clear {the electrical} terminals on each the disposal unit and the facility twine to make sure good electrical contact.
| Disposal Unit | Energy Twine |
|---|---|
| Clear terminals with a wire brush or sandpaper. | Clear terminals with a wire brush or sandpaper. |
| Apply a small quantity of dielectric grease to the terminals. | Apply a small quantity of dielectric grease to the terminals. |
Disconnect the Drain Line
Find the drain line beneath the sink and disconnect it from the disposal. You may want to make use of a pair of pliers or a wrench to loosen the clamp. Watch out to not harm the drain line.
Reconnect the Drain Line
As soon as the disposal is eliminated, you may reconnect the drain line to the brand new disposal. First, slide the clamp over the drain line and onto the brand new disposal’s drain port. Then, tighten the clamp utilizing a pair of pliers or a wrench.
Here is a step-by-step information to reconnecting the drain line:
Step 1: Collect your supplies
You will have the next supplies:
| Materials | Amount |
|---|---|
| Drain line | 1 |
| Disposal | 1 |
| Clamp | 1 |
| Pliers or wrench | 1 |
Step 2: Disconnect the drain line
Find the drain line beneath the sink and disconnect it from the disposal. You may want to make use of a pair of pliers or a wrench to loosen the clamp.
Step 3: Slide the clamp onto the brand new disposal
Slide the clamp over the drain line and onto the brand new disposal’s drain port.
Step 4: Tighten the clamp
Tighten the clamp utilizing a pair of pliers or a wrench.
Step 5: Take a look at the connection
Activate the water and verify for leaks.
How To Take away Outdated Disposal
To take away an previous disposal, comply with these steps:
1. **Flip off the facility to the disposal.** This may be completed on the circuit breaker or fuse field.
2. **Disconnect the water provide to the disposal.** This may be completed by turning off the water valve beneath the sink.
3. **Loosen the mounting bolts that maintain the disposal in place.** There are normally three or 4 bolts, situated across the perimeter of the disposal.
4. **Pull the disposal straight right down to take away it from the sink.** Watch out to not drop the disposal, as it’s heavy.
5. **Disconnect {the electrical} wires from the disposal.** There are normally two or three wires, linked to the terminals on the disposal.
6. **Eliminate the previous disposal in accordance with your native rules.**
Individuals additionally ask
How do I do know if my disposal is damaged?
There are a couple of indicators that your disposal could also be damaged:
• It makes a loud noise when it’s working.
• It doesn’t grind meals correctly.
• It leaks water.
• It has a burning odor.
How can I repair a damaged disposal?
There are some things you may attempt to repair a damaged disposal:
• Examine the facility twine to ensure it’s plugged in securely.
• Examine the water provide to ensure it’s turned on.
• Reset the disposal by urgent the reset button on the underside of the unit.
• If the disposal remains to be not working, you could must name a plumber.
