Are you having hassle opening your Xbox console? Don’t fret, you are not alone. Many individuals discover the method of opening an Xbox 360 S console to be a bit daunting. Nevertheless, with a number of easy steps, you may have your console open and able to restore or improve very quickly. On this article, we are going to give you step-by-step directions on learn how to open an Xbox 360 S console. We may even give you some ideas and tips to make the method simpler.
Earlier than you start, you’ll need to collect a number of instruments. These instruments embrace a Phillips head screwdriver, a Torx T10 screwdriver, and a plastic spudger. You will discover these instruments at most {hardware} shops. After you have gathered your instruments, you’re prepared to start.
Step one is to take away the faceplate from the console. To do that, find the 2 screws on the underside of the console. Use the Phillips head screwdriver to take away these screws. As soon as the screws are eliminated, you may gently pull the faceplate away from the console. Watch out to not injury the faceplate or the console. As soon as the faceplate is eliminated, you’ll have entry to the console’s inside parts. Nevertheless, you aren’t completed but. Within the subsequent paragraph, we are going to give you directions on learn how to take away the highest cowl of the console.
Detaching the Steel Cowl
To start eradicating the steel cowl, you’ll need a T10 Torx screwdriver.
Find the 2 T10 screws on the again of the console, immediately under the exhaust vents.
Utilizing the screwdriver, fastidiously take away the 2 screws.
As soon as the screws are eliminated, raise the steel cowl from the again of the console and slide it in direction of the entrance. The quilt ought to come off simply.
TABLE: Eradicating the Steel Cowl
Eradicating the Energy Provide Unit
To take away the ability provide unit from the Xbox 360 S console, observe these steps:
-
Unplug the console from the ability outlet.
-
Take away the aspect panel. To do that, insert the tip of a spudger or flat-head screwdriver into the small gap on the again of the console, close to the ability provide unit. Pry the aspect panel off the console by twisting the spudger or screwdriver.
-
Find the ability provide unit. It’s a black field situated contained in the console, subsequent to the motherboard.
-
Disconnect the ability provide unit from the motherboard. To do that, press down on the small black tab on the connector and pull it straight up.
-
Take away the ability provide unit from the console. To do that, gently pull it straight in direction of you. Watch out to not injury the ability provide unit or the motherboard.
| Step | Motion |
|---|---|
| 1 | Unplug the console from the ability outlet. |
| 2 | Take away the aspect panel. |
| 3 | Find the ability provide unit. |
| 4 | Disconnect the ability provide unit from the motherboard. |
| 5 | Take away the ability provide unit from the console. |
Eradicating the Motherboard
To take away the motherboard from the Xbox 360 S console, you’ll need to:
- Take away the highest cowl of the console.
- Take away the 4 screws that maintain the motherboard in place.
- Disconnect the ability provide from the motherboard.
- Disconnect the AV cable from the motherboard.
- Disconnect the HDMI cable from the motherboard.
- Disconnect the Ethernet cable from the motherboard.
- Disconnect the USB cables from the motherboard.
- Disconnect the optical audio cable from the motherboard.
- Disconnect the wi-fi controller receiver from the motherboard.
- Disconnect the ability button from the motherboard.
- Disconnect the eject button from the motherboard.
- Disconnect the disc drive from the motherboard.
- Disconnect the arduous drive from the motherboard.
- Fastidiously raise the motherboard out of the console.
Desk of Screws
| Screw Dimension | Amount |
|---|---|
| T10 Torx | 4 |
Find out how to Open Xbox 360 S Console
To open Xbox 360 S Console, you’ll need the next:
- T8 Torx Screwdriver
- Phillips #0 Screwdriver
- Pry Instrument
After you have gathered the required instruments, observe these steps to open the console:
1. **Take away the Faceplate:** Use the T8 Torx screwdriver to take away the 4 screws situated on the underside of the console. As soon as the screws are eliminated, gently pull the faceplate off of the console.
2. **Take away the High Panel:** Use the Phillips #0 screwdriver to take away the 4 screws situated on the highest panel of the console. As soon as the screws are eliminated, gently raise the highest panel off of the console.
3. **Take away the Facet Panels:** Use the pry device to fastidiously pry open the aspect panels of the console. Watch out to not injury the panels.
4. **Take away the Motherboard:** Use the Phillips #0 screwdriver to take away the 4 screws situated on the motherboard. As soon as the screws are eliminated, fastidiously raise the motherboard out of the console.
5. **Take away the Energy Provide:** Use the Phillips #0 screwdriver to take away the 2 screws situated on the ability provide. As soon as the screws are eliminated, fastidiously raise the ability provide out of the console.
6. **Take away the Optical Drive:** Use the Phillips #0 screwdriver to take away the 2 screws situated on the optical drive. As soon as the screws are eliminated, fastidiously raise the optical drive out of the console.
Individuals Additionally Ask About Find out how to Open Xbox 360 S Console
What instruments do I must open an Xbox 360 S Console?
You will have a T8 Torx screwdriver, a Phillips #0 screwdriver, and a pry device.
How do I take away the faceplate of an Xbox 360 S Console?
Use the T8 Torx screwdriver to take away the 4 screws situated on the underside of the console. As soon as the screws are eliminated, gently pull the faceplate off of the console.
How do I take away the highest panel of an Xbox 360 S Console?
Use the Phillips #0 screwdriver to take away the 4 screws situated on the highest panel of the console. As soon as the screws are eliminated, gently raise the highest panel off of the console.
