Whether or not you are upgrading your graphics card or troubleshooting an issue, understanding find out how to take away it safely and effectively is important. Graphic playing cards are delicate parts, so it is necessary to take care when dealing with them. On this information, we’ll stroll you thru the step-by-step means of eradicating a graphics card out of your laptop, making certain that you just do it with out inflicting any injury.
Earlier than you start, energy down your laptop and unplug it from the facility outlet. This may stop any electrical shocks or injury to the parts. Subsequent, open your laptop case and find the graphics card. It can sometimes be put in in a PCI Categorical (PCIe) slot on the motherboard. As soon as you have discovered the graphics card, you may have to launch the retaining clip that holds it in place. The clip is often positioned on the finish of the PCIe slot, and it may be launched by urgent down on it or sliding it to the aspect.
As soon as the retaining clip is launched, you’ll be able to rigorously pull the graphics card straight up and out of the PCIe slot. You should definitely help the cardboard along with your different hand to stop it from bending or breaking. If the cardboard is caught, don’t drive it. As an alternative, verify to be sure that all the retaining clips are launched and that there are not any cables or different obstructions stopping the cardboard from being eliminated. With the graphics card eliminated, now you can proceed along with your improve or troubleshooting.
Eradicating the Screws
The subsequent step in eradicating your graphics card is to find and take away the screws which can be holding it in place. These screws are sometimes positioned on the again of the cardboard, close to the I/O panel. They’re often small, Phillips-head screws, however they could fluctuate relying on the make and mannequin of your graphics card. To take away the screws, you have to a small Phillips-head screwdriver.
After you have positioned the screws, rigorously unscrew them. You should definitely help the graphics card along with your different hand as you do that, in order that it doesn’t fall out of the slot. As soon as the screws are eliminated, you’ll be able to gently pull the graphics card straight out of the PCIe slot. Watch out to not bend or injury the cardboard as you do that.
| Screw Location | Screw Kind | Screwdriver Required |
|---|---|---|
| Again of the graphics card, close to the I/O panel | Phillips-head screw | Phillips-head screwdriver |
Extra suggestions for eradicating the screws:
- If you’re having hassle eradicating the screws, attempt utilizing a magnetic screwdriver. This may assist to maintain the screws from falling out as you unscrew them.
- Watch out to not overtighten the screws whenever you reinstall the graphics card. This will injury the cardboard or the motherboard.
- If you happen to lose any of the screws, you’ll be able to often discover replacements at your native ironmongery shop.
Pulling the Card Out
As soon as the cardboard is unlocked, you’ll be able to rigorously pull it out of the motherboard slot. To do that, grasp the cardboard by the highest and backside edges and gently rock it backwards and forwards till it comes unfastened. Don’t pull on the cardboard by the wires or connectors, as this might injury them.
As soon as the cardboard is unfastened, raise it straight up and out of the slot. Watch out to not bend or injury the cardboard as you take away it.
Listed here are some extra suggestions for pulling the cardboard out:
- If the cardboard is caught, don’t drive it. Gently rock it backwards and forwards till it comes unfastened.
- Don’t contact the gold contacts on the cardboard.
- If you’re having hassle eradicating the cardboard, you should utilize a small flat-head screwdriver to softly pry it out of the slot.
As soon as the cardboard is eliminated, you’ll be able to retailer it in an anti-static bag till you’re prepared to put in it in one other laptop.
Cleansing the Slot
As soon as you have eliminated your graphics card, it is a good suggestion to wash the slot it was put in in. Over time, mud and particles can construct up within the slot, which may trigger issues with the connection between your graphics card and your motherboard. To wash the slot, use a mushy, dry fabric or a compressed air can. Watch out to not injury the slot or its parts.
If the slot is especially soiled, you might want to make use of a cotton swab dipped in isopropyl alcohol to wash it. You should definitely let the alcohol dry utterly earlier than reinserting your graphics card.
Extra Suggestions for Cleansing the Slot
- Use a flashlight to examine the slot for any particles or injury.
- If you happen to’re utilizing a compressed air can, maintain it upright and spray in brief bursts. Keep away from spraying immediately into the slot.
- If you happen to’re utilizing a cotton swab dipped in isopropyl alcohol, be sure you wring out the swab earlier than inserting it into the slot.
- Let the alcohol dry utterly earlier than reinserting your graphics card.
How To Take away Graphic Card
Earlier than you start, energy down your laptop and unplug it from the facility outlet. You will additionally have to discharge any static electrical energy by touching a metallic object like a doorknob or radiator.
Subsequent, find the graphics card. It can often be the biggest card in your laptop, and it’ll have quite a few ports on the again for connecting displays. As soon as you have discovered the graphics card, you can begin eradicating it.
To take away the graphics card, first take away the screws which can be holding it in place. There’ll often be two or three screws, positioned on the again of the pc. As soon as the screws are eliminated, you’ll be able to gently pull the graphics card straight out of the slot.
If the graphics card is caught, you might want to make use of a screwdriver to softly pry it unfastened. Watch out to not injury the graphics card or the motherboard.
As soon as the graphics card is eliminated, you’ll be able to disconnect the facility cables from the again of the cardboard. There’ll often be one or two energy cables, relying on the kind of graphics card.
Now you’ll be able to set up your new graphics card. To do that, merely insert the brand new card into the slot on the motherboard and tighten the screws. Then, join the facility cables to the again of the cardboard. Lastly, energy in your laptop and set up the drivers in your new graphics card.
