Performing an oil change in your Kia 2022 Seltos is a vital upkeep job that ensures the longevity and efficiency of your car. Whether or not you are a seasoned DIY fanatic or a novice in search of to save lots of on upkeep prices, this complete information will give you step-by-step directions and important tricks to navigate the oil change course of effortlessly. By following these detailed directions, you may acquire the arrogance to take care of your car’s optimum situation whereas extending its lifespan.
To embark on this important upkeep job, you may require a number of fundamental instruments and supplies. Collect a brand new oil filter, the advisable engine oil to your Kia 2022 Seltos, a brand new washer for the drain plug, a wrench or socket set, an oil filter wrench, a drain pan to gather the used oil, and a funnel for pouring the brand new oil. With these necessities at your disposal, you may proceed to the following step: getting ready your car for the oil change.
Earlier than commencing the oil change, guarantee your Kia 2022 Seltos is parked on a degree floor and interact the parking brake to forestall any motion. Find the hood launch lever contained in the car and lift the hood to entry the engine bay. Permit the engine to chill for roughly half-hour to forestall burns from sizzling parts. As soon as the engine has cooled sufficiently, proceed to the following step: finding the oil drain plug and oil filter.
Collect Vital Instruments and Supplies
Altering the oil in your 2022 Kia Seltos is an easy job that may be accomplished in about half-hour. Earlier than you begin, collect the next instruments and supplies:
- Socket wrench or ratchet with 17mm socket
- Oil filter wrench
- Funnel
- Oil pan
- Gloves
- Security glasses
Instruments:
- 5 quarts of 0W-20 full artificial motor oil
- New oil filter (Kia half quantity 26300-35503)
- New drain plug washer (Kia half quantity 21513-23000)
- Oil absorbent pads (non-compulsory)
Supplies:
After getting gathered all the essential instruments and supplies, you may proceed to vary the oil in your 2022 Kia Seltos.
| Device | Description |
| Socket wrench or ratchet with 17mm socket | Used to take away the oil drain plug |
| Oil filter wrench | Used to take away and set up the oil filter |
| Funnel | Used to pour new oil into the engine |
| Oil pan | Used to catch the used oil |
| Gloves | Protects your fingers from sizzling oil |
| Security glasses | Protects your eyes from flying particles |
Security First: Park and Safe the Automobile
Earlier than beginning any upkeep work in your Kia 2022 Seltos, it is essential to prioritize security. Comply with these steps to park and safe your car first:
1. Park on a Degree, Secure Floor
Pull your Seltos into a chosen parking spot or on a agency, flat floor that ensures stability throughout the oil change course of.
2. Interact the Parking Brake and Place Wheel Chocks
Interact the parking brake firmly to forestall the car from rolling as soon as lifted. Moreover, place wheel chocks or rocks behind the rear wheels of the Seltos to make sure it stays safe when you work beneath.
3. Collect Vital Instruments and Supplies
Earlier than elevating the car, guarantee you might have all the required instruments and supplies for the oil change, together with a brand new oil filter, clear rags, a socket wrench set, and recent motor oil of the required viscosity.
4. Permit Engine to Cool
It is important to attend till your Seltos’s engine has cooled down earlier than performing an oil change. This ensures that the oil is now not dangerously sizzling and reduces the danger of burns.
Find the Engine Oil Drain Plug
The engine oil drain plug is often situated on the backside of the oil pan, which is the bottom a part of the engine. On the 2022 Kia Seltos, the oil pan is manufactured from aluminum and is situated below the engine block. To find the oil drain plug, observe these steps:
- Park the Seltos on a degree floor and interact the parking brake.
- Find the oil pan below the engine block. It’s a massive, silver-colored pan with a drain plug on the backside.
- Place an oil drain pan below the oil pan to catch the draining oil.
- Use a 17mm socket wrench to loosen the oil drain plug. Watch out to not overtighten the plug, as this could harm the oil pan.
The oil will start to empty out of the oil pan. Permit all the oil to empty out earlier than changing the drain plug.
| Device | Dimension |
|---|---|
| Socket wrench | 17mm |
Place the Drain Pan
Find the oil drain plug beneath the oil pan. The precise location might differ relying on the particular yr and mannequin of your Kia Seltos. It sometimes seems as a 17mm or 19mm bolt on the underside of the oil pan. It is advisable to make use of a socket wrench or a field wrench to loosen the plug.
Place a drain pan instantly beneath the oil drain plug to gather the used oil. Make certain the drain pan is massive sufficient to accommodate the capability of the oil to be drained. Most Kia Seltos fashions have an oil capability between 4.7 to five.5 quarts. Think about using a pan with a capability of at the least 6 quarts to make sure enough area for the drained oil.
You possibly can improve the accuracy of the oil draining course of by elevating the entrance of the car. This enables the oil to empty extra simply and utterly from the oil pan. Use applicable security measures whereas elevating the car, corresponding to parking it on a degree floor, partaking the parking brake, and utilizing sturdy jack stands or ramps.
| Wanted Instruments |
|---|
| 17mm or 19mm socket wrench or field wrench |
| Drain pan with a capability of at the least 6 quarts |
| Security glasses |
| Gloves |
Unscrew the Oil Drain Plug Fastidiously
Find the oil drain plug on the backside of the oil pan. It’s often a 17mm or 19mm bolt head. Utilizing a socket wrench with the suitable measurement socket, fastidiously loosen the oil drain plug by turning it counterclockwise. Don’t take away it utterly but.
Place the oil drain pan below the oil drain plug to catch the used oil. Make sure that the pan is massive sufficient to carry all of the oil that can drain out. Place the pan barely off-center to keep away from splashing oil on your self or the car.
Slowly and thoroughly unscrew the oil drain plug the remainder of the way in which by hand. Be ready for the oil to start out flowing out instantly. Permit the oil to empty utterly into the oil drain pan. Relying on the quantity of oil within the engine, this will take a couple of minutes.
As soon as the oil has stopped draining, substitute the oil drain plug by hand-tightening it clockwise. Don’t overtighten it, as this could harm the oil pan threads. Use a torque wrench to tighten the oil drain plug to the required torque, which is often round 29-35 ft-lbs (40-47 Nm).
To make sure a correct seal, apply a small quantity of oil to the washer on the oil drain plug earlier than changing it. This may assist stop leaks.
| Materials | Torque |
|---|---|
| Aluminum Drain Plug | 29-35 ft-lbs (40-47 Nm) |
| Metal Drain Plug | 36-42 ft-lbs (49-56 Nm) |
Permit the Previous Oil to Drain Fully
As soon as the oil pan plug has been loosened, permit the outdated oil to empty into the oil drain pan utterly. This course of can take a number of minutes, so be affected person and let all of the outdated oil drain. It’s essential to make sure that all of the outdated oil has been drained to keep away from mixing the outdated and new oil, which might have an effect on the efficiency and lifetime of the engine.
Ideas for Efficient Oil Drainage:
1. Park the car on a degree floor to make sure correct oil drainage.
2. Place the oil drain pan instantly beneath the oil pan plug to catch all of the draining oil.
3. Permit the oil to empty for at the least quarter-hour, or till a gentle stream of oil turns right into a gradual drip.
4. If the oil doesn’t drain freely or utterly, test for any obstructions or leaks within the oil pan or drain plug space.
5. Clear the drain plug and its washer earlier than reinstalling it to forestall leaks.
6. Superior Ideas for Enhanced Drainage:
| Method | Objective |
|---|---|
| Increase the Automobile on Ramps | Elevating the automobile permits gravity to help within the draining course of, guaranteeing sooner and extra full oil elimination. |
| Use a Vacuum Extractor | This gadget pumps a vacuum into the oil dipstick tube, extracting oil from the engine extra shortly and completely. |
| Apply Warmth to the Oil Pan | Gently heating the oil pan utilizing a warmth gun or hair dryer can heat the oil, decreasing its viscosity and facilitating higher drainage. |
Exchange the Oil Drain Plug and Tighten
Find the oil drain plug on the oil pan. It’s often a 17mm bolt. Place the oil drain pan below the oil drain plug.
Utilizing a 17mm wrench, fastidiously loosen the oil drain plug. Don’t take away it utterly but.
Permit the oil to empty into the oil drain pan. This may increasingly take a couple of minutes.
As soon as the oil has drained, clear the oil drain plug and the threads on the oil pan with a clear rag.
Apply a skinny layer of motor oil to the threads of the oil drain plug.
Tighten the oil drain plug again into the oil pan. Don’t overtighten.
Use a torque wrench to tighten the oil drain plug to 29 ft-lbs.
Wipe away any extra oil from the oil drain plug and the encircling space.
Eliminate the used oil and oil filter correctly.
| Instruments Required: |
|---|
| 17mm wrench |
| Oil drain pan |
| Torque wrench |
Find the Engine Oil Filter
The engine oil filter is situated on the facet or backside of the engine, often close to the oil pan. It’s a cylindrical-shaped element with a black or metallic exterior. It might have a cap or lid that may be eliminated to entry the filter ingredient inside.
To find the engine oil filter, observe these steps:
1. Park the Kia Seltos on a degree floor and interact the parking brake.
2. Open the hood and find the engine.
3. Establish the oil filter by its cylindrical form and black or metallic exterior.
4. If essential, observe the oil filter strains from the engine to the filter housing.
For those who encounter difficulties finding the engine oil filter, confer with the Kia Seltos proprietor’s guide for particular directions.
Extra Particulars for Steps 3-4:
| 3 | The oil filter is commonly situated on the passenger facet of the engine, near the entrance or rear. |
|---|---|
| 4 | For those who can not discover the oil filter instantly from the engine, you may hint the oil filter strains. These strains join the oil filter to the engine and are often versatile rubber hoses. |
By following these steps, it is possible for you to to precisely find the engine oil filter in your 2022 Kia Seltos.
Take away the Previous Oil Filter
The outdated oil filter is situated on the underside of the engine. It’s a cylindrical-shaped object with a black cap. To take away the outdated oil filter, you will have an oil filter wrench.
Place the oil filter wrench on the outdated oil filter and switch it counterclockwise to loosen it. As soon as the filter is free, take away it by hand.
Watch out to not spill any oil when eradicating the outdated filter. For those who do spill oil, clear it up instantly with a rag.
Earlier than putting in the brand new oil filter, apply a skinny layer of latest oil to the gasket on the filter. This may assist to create a seal and stop leaks.
Screw the brand new oil filter onto the engine by hand till it’s comfortable. Don’t overtighten the filter.
As soon as the brand new oil filter is put in, you may add new oil to the engine. Consult with your car’s proprietor’s guide for the right amount of oil so as to add.
Oil Filter Torque Specs
| Engine | Torque |
|---|---|
| 1.6L GDI | 24 ft-lbs |
| 2.0L MPI | 29 ft-lbs |
| 1.6L Turbo GDI | 29 ft-lbs |
Set up the New Oil Filter
1. Find the oil filter housing, which is often a black or silver canister close to the highest of the engine.
2. Place the oil drain pan beneath the oil filter housing.
3. Use an oil filter wrench to loosen the oil filter. Watch out to not overtighten the filter.
4. Take away the outdated oil filter and discard it.
5. Rub a small quantity of latest oil on the gasket of the brand new oil filter.
6. Screw the brand new oil filter onto the housing by hand till it’s comfortable.
7. Tighten the oil filter utilizing the oil filter wrench. Once more, watch out to not overtighten the filter.
8. Fill the engine with new oil.
9. Test the oil degree and add extra oil if essential.
10. Begin the engine and let it run for a couple of minutes to flow into the brand new oil. Test for any leaks and tighten the oil filter if essential.
| Step | Description |
|---|---|
| 1 | Find the oil filter housing. |
| 2 | Place the oil drain pan beneath the oil filter housing. |
| 3 | Use an oil filter wrench to loosen the oil filter. |
| 4 | Take away the outdated oil filter and discard it. |
| 5 | Rub a small quantity of latest oil on the gasket of the brand new oil filter. |
| 6 | Screw the brand new oil filter onto the housing by hand till it’s comfortable. |
| 7 | Tighten the oil filter utilizing the oil filter wrench. |
| 8 | Fill the engine with new oil. |
| 9 | Test the oil degree and add extra oil if essential. |
| 10 | Begin the engine and let it run for a couple of minutes to flow into the brand new oil. Test for any leaks and tighten the oil filter if essential. |
The best way to Change Oil on Kia 2022 Selto
Altering the oil in your Kia 2022 Selto is an easy upkeep job that may be accomplished in about half-hour. By following these step-by-step directions, it can save you cash and hold your automobile operating easily.
Supplies You will Want:
* 5 quarts of 0W-20 artificial oil
* New oil filter
* Oil drain pan
* Funnel
* Wrench or socket set
* Rags
Directions:
- Park your Selto on a degree floor and interact the parking brake.
- Find the oil pan beneath the engine.
- Place the oil drain pan below the oil pan.
- Unscrew the oil drain plug utilizing a wrench or socket.
- Permit the oil to empty utterly into the oil drain pan.
- Exchange the oil drain plug and tighten it securely.
- Find the oil filter on the engine.
- Use an oil filter wrench to take away the outdated oil filter.
- Apply a skinny coat of latest oil to the gasket of the brand new oil filter.
- Screw the brand new oil filter onto the engine by hand till it’s comfortable.
- Utilizing the oil filter wrench, tighten the oil filter an extra ¾ flip.
- Take away the funnel from the oil filler gap and insert the dipstick.
- Test the oil degree and add extra oil as wanted.
- Exchange the oil cap and tighten it securely.
- Begin the engine and let it run for a couple of minutes.
- Test for any leaks and re-tighten any free connections as essential.
