When confronted with the daunting prospect of changing a defective gasoline pump in your Honda Silverwing, it is essential to arm your self with the fitting info and instruments. This step-by-step information will empower you to sort out this job with confidence, guaranteeing your loved one Silverwing roars again to life with newfound vigor.
Earlier than diving into the method, it is important to collect the required instruments. You will want a set of screwdrivers, wrenches, and a socket set. Security needs to be your paramount concern, so do not forget to put on gloves and eye safety all through the process. With all of the instruments in place, find the gasoline pump, which is often located underneath the gasoline tank. Rigorously disconnect the gasoline traces and electrical connectors hooked up to the pump.
Eradicating the Facet Panels
To entry the gasoline pump, you will have to take away the facet panels of the Honda Silverwing. Here is an in depth information on how you can do it:
Step 1: Take away the Entrance Panel
Find the 2 screws securing the entrance panel to the physique. Use a Phillips head screwdriver to take away these screws. Then, rigorously raise the entrance panel off and set it apart.
Step 2: Take away the Below Panel
There are six screws securing the underneath panel: two on the entrance, two within the center, and two on the again. Take away these screws with a Phillips head screwdriver. As soon as all of the screws are eliminated, gently pull the underneath panel straight all the way down to detach it from the physique.
Step 3: Take away the Facet Panel (Left or Proper)
Find the three screws securing the facet panel to the physique: one on the high, one within the center, and one on the backside. Take away these screws with a Phillips head screwdriver. Then, rigorously raise the facet panel off and set it apart.
| Screw Location | Variety of Screws |
|---|---|
| Entrance Panel | 2 |
| Below Panel | 6 |
| Facet Panel (Left or Proper) | 3 |
Finding the Gasoline Tank
The gasoline tank on the Honda Silverwing is situated beneath the seat. To entry the tank, observe these steps:
1. Take away the seat by lifting up on the entrance of the seat and pulling it in direction of you.
2. Find the gasoline tank cap on the highest of the tank. The cap is often black or grey and has a Honda emblem on it.
3. Take away the gasoline tank cap by turning it counterclockwise.
4. Elevate the gasoline tank up and out of the motorbike.
Accessing the Gasoline Pump
The gasoline pump is situated contained in the gasoline tank. To entry the gasoline pump, observe these steps:
1. Take away the gasoline filter from the gasoline pump. The gasoline filter is situated on the facet of the gasoline pump and is held in place by a single bolt.
2. Take away the gasoline pump from the gasoline tank. The gasoline pump is held in place by 4 bolts. Take away the bolts and raise the gasoline pump out of the tank.
3. Disconnect {the electrical} connector from the gasoline pump.
4. Take away the gasoline pump from the motorbike.
Gasoline Pump Removing Desk
| Step | Motion |
|---|---|
| 1 | Take away gasoline filter from gasoline pump |
| 2 | Take away gasoline pump from gasoline tank. |
| 3 | Disconnect electrical connector from gasoline pump. |
| 4 | Take away gasoline pump from motorbike |
Disconnecting the Gasoline Traces
To disconnect the gasoline traces, you will have to observe these steps:
-
Find the gasoline traces. The gasoline traces are sometimes situated on the facet of the gasoline tank. They’re often black or blue in shade.
2. Take away the gasoline line clamps. The gasoline line clamps are small metallic clips that maintain the gasoline traces in place. Use a pair of pliers or a screwdriver to take away the clamps.
- **Disconnect the **gasoline traces.
As soon as the gasoline line clamps are eliminated, you may disconnect the gasoline traces by pulling them straight off the gasoline tank. Watch out to not injury the gasoline traces or the gasoline tank when disconnecting them.
| Gasoline Line | Location |
|---|---|
| Provide line | Proper facet of the tank |
| Return line | Left facet of the tank |
-
Plug the gasoline traces. As soon as the gasoline traces are disconnected, you will have to plug them to stop gasoline from leaking out. You need to use a rubber cap or a bit of tape to plug the gasoline traces.
Eradicating the Gasoline Tank
1. **Find the gasoline tank.** The gasoline tank is situated underneath the seat of the motorbike.
2. **Disconnect the gasoline line.** Use a wrench to loosen the gasoline line clamp and disconnect the gasoline line from the gasoline tank.
3. **Disconnect {the electrical} connector.** Find {the electrical} connector for the gasoline pump and disconnect it.
4. **Take away the gasoline tank bolts.** There are 4 bolts that maintain the gasoline tank in place. Use a wrench to take away these bolts.
Eradicating the Gasoline Pump
1. **Find the gasoline pump.** The gasoline pump is situated contained in the gasoline tank.
2. **Take away the gasoline pump retainer.** Use a screwdriver to take away the screws that maintain the gasoline pump retainer in place.
3. **Pull out the gasoline pump.** As soon as the gasoline pump retainer is eliminated, you may pull out the gasoline pump from the gasoline tank.
Changing the Gasoline Filter
1. **Find the gasoline filter.** The gasoline filter is situated contained in the gasoline tank, close to the gasoline pump.
2. **Take away the gasoline filter.** Use a wrench to loosen the gasoline filter clamp and take away the gasoline filter.
3. **Set up the brand new gasoline filter.** Set up the brand new gasoline filter within the reverse order of elimination.
Reinstalling the Gasoline Tank
1. **Place the gasoline tank in place.** Place the gasoline tank in place on the motorbike.
2. **Set up the gasoline tank bolts.** Tighten the 4 bolts that maintain the gasoline tank in place.
3. **Join {the electrical} connector.** Join {the electrical} connector for the gasoline pump.
4. **Join the gasoline line.** Join the gasoline line to the gasoline tank and tighten the gasoline line clamp.
Accessing the Gasoline Pump
To entry the gasoline pump in a Honda Silverwing, you will have to take away the next elements:
- Seat
- Rear physique panel
- Gasoline tank
- Battery
- Gasoline pump cowl
Eradicating the Gasoline Pump Cowl
1. Find the gasoline pump cowl on the left facet of the motorbike, beneath the gasoline tank.
2. Take away the 2 bolts that safe the duvet utilizing a 10mm socket.
3. Rigorously raise the duvet off the motorbike.
As soon as the gasoline pump cowl is eliminated, you should have entry to the gasoline pump. The gasoline pump is held in place by a single bolt. Take away this bolt utilizing a 12mm socket and punctiliously raise the gasoline pump out of the gasoline tank.
When reinstalling the gasoline pump, be sure you use a brand new O-ring on the gasoline pump inlet. Tighten the gasoline pump bolt to the desired torque and reinstall the gasoline pump cowl.
| Part | Torque |
|---|---|
| Gasoline pump bolt | 10 Nm (7 ft-lbs) |
| Gasoline pump cowl bolts | 5 Nm (3 ft-lbs) |
Disconnecting the Electrical Connector
As soon as the gasoline tank is faraway from the chassis and the gasoline pump meeting is uncovered, you will have to disconnect {the electrical} connector that provides energy to the gasoline pump. Observe these steps:
1. Find {the electrical} connector on the gasoline pump meeting. It’s sometimes a black or grey plastic connector with a number of wires resulting in it.
2. Press the discharge tab or button on {the electrical} connector. This may launch the locking mechanism that holds the connector in place.
3. Gently pull {the electrical} connector right away from the gasoline pump meeting. Watch out to not injury the wires or terminals.
4. As soon as {the electrical} connector is disconnected, you will have to take away the gasoline pump meeting from the gasoline tank. To do that, find the mounting bolts or screws that maintain the gasoline pump meeting in place and take away them.
5. Rigorously raise the gasoline pump meeting out of the gasoline tank.
6. Examine {the electrical} connector for injury or corrosion. If the connector is broken or corroded, it could must be changed.
7. If {the electrical} connector is in good situation, you may reconnect it to the gasoline pump meeting by following the steps in reverse order.
Eradicating the Gasoline Pump Mount
To take away the gasoline pump mount, you will have to:
- Find the gasoline pump mount. It’s situated on the underside of the gasoline tank, in direction of the rear of the motorbike.
- Take away the 2 bolts that safe the gasoline pump mount to the gasoline tank.
- Rigorously raise the gasoline pump mount off of the gasoline tank.
- Disconnect the gasoline line from the gasoline pump mount.
- Disconnect {the electrical} connector from the gasoline pump.
- Take away the gasoline pump from the gasoline pump mount.
- The seat
- The rear fairing
- The gasoline tank
- The airbox
- The throttle physique
- The engine is tough to start out.
- The engine stalls when you are driving.
- The engine loses energy when you are driving.
- You hear a whining noise coming from the gasoline tank.
7. Examine the gasoline pump mount for any injury or put on.
Rigorously examine the gasoline pump mount for any indicators of harm or put on. If there may be any injury or put on, the gasoline pump mount could must be changed. Consult with the producer’s directions for particular alternative procedures.
| Harm or Put on | Motion |
|---|---|
| Cracks or breaks | Change the gasoline pump mount. |
| Rust or corrosion | Clear the gasoline pump mount with a wire brush and apply a rust-resistant coating. |
| Bent or deformed | Change the gasoline pump mount. |
Extracting the Gasoline Pump
1. Security Precautions
Make sure the engine is off and has cooled down. Disconnect the detrimental battery terminal for security.
2. Find the Gasoline Pump
Consult with your Honda Silverwing’s service guide to find out the gasoline pump’s actual location.
3. Take away the Gasoline Tank
Find the gasoline tank’s mounting bolts and disconnect any electrical connections. Rigorously raise the gasoline tank and set it apart.
4. Disconnect the Gasoline Traces
Use gasoline line pliers or a wrench to detach the gasoline traces linked to the gasoline pump.
5. Entry the Gasoline Pump Meeting
Relying in your Silverwing mannequin, you could have to take away an entry panel or housing to realize entry to the gasoline pump meeting.
6. Unbolt the Gasoline Pump Meeting
Find the bolts or screws securing the gasoline pump meeting in place and punctiliously take away them utilizing an acceptable socket or wrench.
7. Elevate Out the Meeting
As soon as the bolts are eliminated, gently raise the gasoline pump meeting out of its housing.
8. Separating the Gasoline Pump from the Meeting
The gasoline pump is often secured inside the meeting utilizing a retaining ring or a locking mechanism. Consult with your service guide for particular directions on how you can safely take away the gasoline pump from the meeting. Often, this entails utilizing a circlip pliers to take away the retaining ring or rigorously prying the gasoline pump away from the meeting whereas being conscious of potential electrical connections.
9. Examine the Gasoline Pump
As soon as the gasoline pump is extracted, examine it for any seen injury or put on. Test the filter and gasoline traces for any clogging or particles.
Reinstalling the Gasoline Pump
With the gasoline filter put in, it is time to reassemble the gasoline pump. Begin by rigorously aligning the gasoline pump with the gasket and gasoline filter. As soon as it is in place, safe it with the bolts. Torque the bolts to the desired torque, which might be discovered within the service guide or within the desk beneath.
| 12 months | Torque (Nm) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2001-2003 | 10 Nm (7.4 ft-lbs) | ||||||||
| 2004-2009 | 12 Nm (8.9 ft-lbs)
As soon as the gasoline pump is secured, reconnect the gasoline line and electrical connector. Double-check that all the things is linked correctly and tightened to the right torque. Reassembling the Gasoline System10. Reconnecting the Gasoline PumpNow that the gasoline pump is again in place, it is time to reconnect the gasoline traces. Begin by attaching the decrease gasoline line to the pump’s inlet port. Guarantee the road is totally seated and tightened utilizing the provided clamp. Subsequent, do the identical for the higher gasoline line, which connects to the pump’s outlet port. Once more, ensure the road is safe. Lastly, reconnect {the electrical} connector to the gasoline pump. Make sure the connector is pushed in firmly till it clicks into place.
With the gasoline traces and electrical connector reconnected, your gasoline system is now reassembled. Use the remaining steps to finish the reinstallation of the gasoline module and tank. Honda Silverwing How To Get To The Gasoline PumpTo get to the gasoline pump on a Honda Silverwing, you will have to take away the next elements: After getting eliminated these elements, it is possible for you to to entry the gasoline pump. Watch out when eradicating the gasoline pump, as it’s linked to the gasoline traces. Additionally, you will want to interchange the gasoline pump gasket if you set up the brand new gasoline pump. Individuals Additionally Ask About Honda Silverwing How To Get To The Gasoline PumpHow do I do know if my Honda Silverwing gasoline pump is unhealthy?There are a number of indicators that will point out that your Honda Silverwing gasoline pump is unhealthy. These indicators embody: How a lot does it value to interchange a Honda Silverwing gasoline pump?The price to interchange a Honda Silverwing gasoline pump will differ relying on the yr and mannequin of your motorbike. Nonetheless, you may count on to pay between $200 and $400 for the elements and labor. Can I change the Honda Silverwing gasoline pump myself?Sure, you may change the Honda Silverwing gasoline pump your self. Nonetheless, you will need to notice that this can be a advanced restore. If you’re not comfy working in your motorbike, it’s best to take it to a mechanic. |
